Solved

ftp using nas323 via router

Posted on 2009-04-04
13
367 Views
Last Modified: 2013-12-02
Hi,
i have a nas 323, i want to ftp file therefore i create a FTP server using nas 323
i connect to the internet using router.

that mean i have 2 ip one is default gateway ip and nas 323 ip
After all the configuration.i type ftp://mydomainname.
it pop up username and password and i type in it is incorrect.

then i try local ftp the default gateway it also ask for username and password.

im confuse here
can i need to ftp router or ftp nas?
0
Comment
Question by:tankergoblin
  • 7
  • 6
13 Comments
 
LVL 3

Accepted Solution

by:
csaint00 earned 500 total points
ID: 24066628
Did you setup port forwarding on your router for port 20, 21 to go to the nas?
0
 
LVL 7

Author Comment

by:tankergoblin
ID: 24066709
i change my port in NAS to 23 so in my router i port forward 23 in start port and end port.
i use filezilla to connect it show me ENCONREFUSED seems like it cant detech my server .
0
 
LVL 3

Expert Comment

by:csaint00
ID: 24066744
ummm, port 23 is reserved for telnet and 21/22 are reserved for FTP. Why did you change the port?
0
Microsoft Certification Exam 74-409

Veeam® is happy to provide the Microsoft community with a study guide prepared by MVP and MCT, Orin Thomas. This guide will take you through each of the exam objectives, helping you to prepare for and pass the examination.

 
LVL 7

Author Comment

by:tankergoblin
ID: 24066926
im change to 449 still the same
 
i didnt use default port becuase my router has ftp function
0
 
LVL 3

Expert Comment

by:csaint00
ID: 24067075
Whenever you change a port always use 1024 and above as anything below that is reserved, give that a try.
0
 
LVL 7

Author Comment

by:tankergoblin
ID: 24070495
If you still cannot what should i do
0
 
LVL 3

Expert Comment

by:csaint00
ID: 24070687
Well, if it's not a configuration error then just make sure you are ftp'd into the router using the port assigned to the NAS and it should work fine. What are you using to FTP?
0
 
LVL 7

Author Comment

by:tankergoblin
ID: 24070926
"What are you using to FTP?"
what do you mean
0
 
LVL 3

Expert Comment

by:csaint00
ID: 24070945
what client are you testing this with: Internet explorer, FireFTP, Linux command line or something else? Also what type of FTP server are you running?
0
 
LVL 7

Author Comment

by:tankergoblin
ID: 24073874
NAS 323 has built it FTP server. you dont know?

testing this with: IE

0
 
LVL 3

Expert Comment

by:csaint00
ID: 24077166
http://www.dlink.com/products/support.asp?pid=509&sec=0#applications has some firmware updates for the NAS with a few updates to FTP.

Let's use this example to try to make sure we're on the same page,

Say the IP address of NAS is 172.25.25.130 and FTP port is 2121
A PC on the same network is 172.25.25.120
and your router's external IP is 67.38.142.12

Now, when you try to connect from the NAS from a PC on the same network you use the URL ftp://172.25.25.130:2121

From somewhere else on the internet you connect via ftp://67.38.142.12:2121

And the router is configured to forward port 2121 to 172.25.25.130 port 2121. Right?
0
 
LVL 7

Author Comment

by:tankergoblin
ID: 24083437
yes that is what i do

0
 
LVL 3

Expert Comment

by:csaint00
ID: 24085742
OK, if your are connecting to the NAS from a local PC at 172.25.25.130:2121 does your username/pass work? If it doesn't then it seems to be a problem with configuration of the NAS, if it does then it seems to be a problem with the configuration of the router.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Goal:  To set up a secure SSH server for your home computer to make it accessible anywhere AND to use it as a port forwarding proxy. Steps 1.  WinSSHD version 5 is free for personal use.  So download and install it.  You can download it from the…
Please see preceding article here: http://www.experts-exchange.com/Networking/Operating_Systems/A_11209-Root-Bridge-Election.html Figure 1 After Root Bridge has been elected, then what?..... Let's start by defining a Root Port in la…
Viewers will learn how to properly install and use Secure Shell (SSH) to work on projects or homework remotely. Download Secure Shell: Follow basic installation instructions: Open Secure Shell and use "Quick Connect" to enter credentials includi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

829 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question