Solved

Configuring ISA server 2006 Standard Edition as a Tunnel behind a firwal

Posted on 2009-04-05
3
400 Views
Last Modified: 2013-11-16
Dear All,

I have a problem ,  I have a hardware firewall which is configured properly but it doesn't have traffic speed monitoring , so i decided to Configure and ISA server as tunnel to install third party software to see the Speed traffic consumption, I mean this isa server will be between the Client User and the hardware Firewall and the ISA server is for traffic monitoring only, but internet privileges will be given through the firewall hardware ( Ex: Users have full internet access , User Doesn't Have Internet Access at all ) .

I know to do that i have to enable routing not NAT protocol , so firewall can recognize the user ip and give him the privilege which had been assigned to his IP .

Al though i had Enabled that .. but still the isa server is using Securenate and http requests appears to the hardware firewall as from ISA server which off course have full rights to internet Access..

I need to Enable Complete routing which make the users requests appears from his IP ( All his requests ) . .. but unfortunately i couldn't.

Can anybody help me with this??


Regards
Mohamed Hadoka
0
Comment
Question by:hadoka
  • 2
3 Comments
 
LVL 5

Expert Comment

by:theoaks
ID: 24086838
To disable SecureNAT, you must disable the predefined HTTP protocol from the Web proxy filter.

this will mean that application layer filtering will no longer apply, so you wouldnt be able to monitor any traffic.

affectively turning off securenat bypasses the webproxy.
0
 
LVL 5

Expert Comment

by:theoaks
ID: 24129492
response or points please
0
 

Accepted Solution

by:
hadoka earned 0 total points
ID: 24131179
You didn't answer my question ... I need to route the ips , which mean that i want the requests when its coming out the ISA server appears the IP of original pc request ..

Ex:

My Situation now :

PC ( 192.168.2.2 ) >>> ISA Server ( 192.168.2.1)>> HTTP Request (192.168.2.1)

I want this and i had seen it before but unforutnately i can get it :

PC ( 192.168.2.2 ) >>> ISA Server ( 192.168.2.1)>> HTTP Request (192.168.2.2)
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

There are several problems reported according slow link speeds or poor performance in TMG 2010, UAG 2010 or ISA 2006. I want to collect here some of the common issues together to give a brief overview what can be the reason. Nevertheless, not all of…
Common practice undertaken by most system administrators is to document the configurations and final solutions of anything performed by them for their future use and reference. So here I am going to explain how to export ISA Server 2004 Firewall pol…
Established in 1997, Technology Architects has become one of the most reputable technology solutions companies in the country. TA have been providing businesses with cost effective state-of-the-art solutions and unparalleled service that is designed…
Email security requires an ever evolving service that stays up to date with counter-evolving threats. The Email Laundry perform Research and Development to ensure their email security service evolves faster than cyber criminals. We apply our Threat…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question