Solved

Windows server 2003 no time service ?

Posted on 2009-04-06
3
548 Views
Last Modified: 2012-05-06
I am trying to set some time servers on my PDC so that the clients get the correct time from the PDC. However i cannot find any time service in my services.msc console neither can i find the correct registry key beeing:

HKLM\SYSTEM\CurrentControlSet\Services\W32Time\Parameters\Type

Whenever i use w32tm /monitor i get the following message:

BASSERVER.basconsultancy.local [192.168.1.3]:
    ICMP: 0ms delay.
    NTP: -20.1875000s offset from BASFile.basconsultancy.local
        RefID: unspecified / unsynchronized [0.0.0.0]
basexact.basconsultancy.local [192.168.1.30]:
    ICMP: 0ms delay.
    NTP: -4.6093750s offset from BASFile.basconsultancy.local
        RefID: unspecified / unsynchronized [0.0.0.0]
BASFile.basconsultancy.local *** PDC *** [192.168.1.2]:
    ICMP: 0ms delay.
    NTP: error WSAECONNRESET - no server listening on NTP port
basmonitor.basconsultancy.local [192.168.1.7]:
    ICMP: 0ms delay.
    NTP: -49.4712848s offset from BASFile.basconsultancy.local
        RefID: unspecified / unsynchronized [0.0.0.0]

BASfile is the PDC as you can see. But this server also have an error saying there is nog server listing on NTP port. That can be correct because there is no time service available.

Someone have any suggestions?

0
Comment
Question by:John_BAS
3 Comments
 
LVL 22

Accepted Solution

by:
Paka earned 500 total points
ID: 24084207
Let's reset your time service on the PDCE:

Open a command prompt
Type:
"net stop w32time"
"w32tm /unregister" - you might have to do this twice
"w32tm /register
"net start w32time"
"net time /setsntp:YourNTPTimeSource"

You'll need to run the first four commands on the other DCs and NTP clients in your domain (if you made any changes to your domain time settings).
0
 

Author Comment

by:John_BAS
ID: 24084653
Paka,

Your my hero. This worked like a charm. Thank you so much for your help!

Here are your 500 points :)
0
 

Expert Comment

by:GarethABC
ID: 33584415
This was a good solution but I also followed this advice from another site which was perfect
"Try recreating the time service first.
Open a command prompt, enter
net stop w32time
w32tm /unregister
w32tm /register
net start w32time
Ignore error messages you might get from the first two commands.Report error messages you might get from the last two commands."
0

Featured Post

Windows Server 2016: All you need to know

Learn about Hyper-V features that increase functionality and usability of Microsoft Windows Server 2016. Also, throughout this eBook, you’ll find some basic PowerShell examples that will help you leverage the scripts in your environments!

Join & Write a Comment

I guess it is not common knowledge to most Wintel engineers/administrators: If you have an SNMP-based monitoring system in your environment (and it's common to have SNMP or Syslog) it's reasonably easy to enable monitoring of the Windows Event logs,…
Many of us need to configure DHCP server(s) in their environment. We can do that simply via DHCP console on server or using MMC snap-in on each computer with Administrative Tools installed in a network. But what if we have to configure many DHCP ser…
Excel styles will make formatting consistent and let you apply and change formatting faster. In this tutorial, you'll learn how to use Excel's built-in styles, how to modify styles, and how to create your own. You'll also learn how to use your custo…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

708 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

13 Experts available now in Live!

Get 1:1 Help Now