Solved

Kannel SMPP

Posted on 2009-04-06
8
1,429 Views
Last Modified: 2013-12-23
Hi all,

i have installed Kannel on CentOS and Kubuntu, i managed to install kannel, but when i run kannel by typing bearerbox /kannel.conf after 1 minute the server goes down( as you can see in the log below).The second problem is ,during  this one minute that the server is active i tried to open the http gui but  i don't get the normal http page nut only this
-----------------------------Opening by HTTP------------------------------------

Unknown command `/'.
Possible commands are:
status
store-status
log-level
shutdown
suspend
isolate
resume
restart
flush-dlr
stop-smsc
start-smsc
reload-lists



Thanks in advance


kannel@kannel-test:~/Documents$ bearerbox /kannel.conf

2009-04-06 09:19:59 [9452] [0] INFO: Debug_lvl = -1, log_file = <none>, log_lvl = 0

2009-04-06 09:19:59 [9452] [0] WARNING: DLR: using default 'internal' for storage type.

2009-04-06 09:19:59 [9452] [0] INFO: DLR using storage type: internal

2009-04-06 09:19:59 [9452] [0] DEBUG: Kannel bearerbox version `cvs-20090403'.

Build `Apr  6 2009 04:12:25', compiler `4.3.2'.

System Linux, release 2.6.27-7-generic, version #1 SMP Fri Oct 24 06:42:44 UTC 2008, machine i686.

Hostname kannel-test, IP 127.0.1.1.

Libxml version 2.6.32.

Using OpenSSL 0.9.8g 19 Oct 2007.

Using native malloc.

 

2009-04-06 09:19:59 [9452] [0] INFO: Added logfile `/tmp/kannel.log' with level `0'.

2009-04-06 09:19:59 [9452] [0] INFO: Started access logfile `access.log'.

2009-04-06 09:19:59 [9452] [0] INFO: HTTP: Opening server at port 13000.

2009-04-06 09:19:59 [9452] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) maps to pid 9452.

2009-04-06 09:19:59 [9452] [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller)

2009-04-06 09:19:59 [9452] [2] DEBUG: Thread 2 (gwlib/http.c:server_thread) maps to pid 9452.

2009-04-06 09:19:59 [9452] [0] DEBUG: Started thread 2 (gwlib/http.c:server_thread)

2009-04-06 09:19:59 [9452] [3] DEBUG: Thread 3 (gw/bb_http.c:httpadmin_run) maps to pid 9452.

2009-04-06 09:19:59 [9452] [0] DEBUG: Started thread 3 (gw/bb_http.c:httpadmin_run)

2009-04-06 09:19:59 [9452] [0] INFO: ----------------------------------------

2009-04-06 09:19:59 [9452] [0] INFO: Kannel bearerbox II version cvs-20090403 starting

2009-04-06 09:20:04 [9452] [0] INFO: MAIN: Start-up done, entering mainloop

2009-04-06 09:20:04 [9452] [0] DEBUG: Shutting down Kannel...

2009-04-06 09:20:04 [9452] [0] DEBUG: shutting down smsc

2009-04-06 09:20:04 [9452] [0] DEBUG: shutting down udp

2009-04-06 09:20:04 [9452] [0] INFO: All flow threads have died, killing core

2009-04-06 09:20:04 [9452] [3] DEBUG: HTTP: No clients with requests, quitting.

2009-04-06 09:20:04 [9452] [3] DEBUG: Thread 3 (gw/bb_http.c:httpadmin_run) terminates.

2009-04-06 09:20:04 [9452] [0] DEBUG: Waiting for 2 (gwlib/http.c:server_thread) to terminate

2009-04-06 09:20:04 [9452] [2] DEBUG: Thread 2 (gwlib/http.c:server_thread) terminates.

2009-04-06 09:20:04 [9452] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) terminates.

2009-04-06 09:20:04 [9452] [0] INFO: Total WDP messages: received 0, sent 0

2009-04-06 09:20:04 [9452] [0] INFO: Total SMS messages: received 0, sent 0

2009-04-06 09:20:04 [9452] [0] DEBUG: Immutable octet strings: 87.

Open in new window

0
Comment
Question by:tafil
  • 5
  • 3
8 Comments
 
LVL 61

Expert Comment

by:gheist
ID: 24085126
No kannel from vendor in CentOS.
Did you build yourself? Install vendor package, at least it has working config file.
It looks like your installation has problems with backend database since main loop dies.
0
 

Author Comment

by:tafil
ID: 24085172
I tried both to build  it and rpm but no one of them works.I also tried this tut.. but without susses http://www.ddj.co.za/archives/46/howto-compile-kannel-on-ubuntukubuntu-804.
 
0
 
LVL 61

Accepted Solution

by:
gheist earned 125 total points
ID: 24085237
No need to compile - you can just mess up things with inconsistent openssl and db packages. Real thing here for free:
http://packages.ubuntu.com/hardy/net/kannel
0
 

Author Comment

by:tafil
ID: 24085264
i tied that to but again the same problem.Do you have any idea why this mess when opening kannel buy http?


Unknown command `/'.
Possible commands are:
status
store-status
log-level
shutdown
suspend
isolate
resume
restart
flush-dlr
stop-smsc
start-smsc
reload-lists
0
Zoho SalesIQ

Hassle-free live chat software re-imagined for business growth. 2 users, always free.

 
LVL 61

Expert Comment

by:gheist
ID: 24087095
What did you type for url? Do you have antivirus with link scanner which goes into /shutdown?
0
 

Author Comment

by:tafil
ID: 24087295
i used http://localhost:13000 on the local host without any virus scanner and on my pc with http://<ip address of kannel server >:13000 always with same resault.
0
 
LVL 61

Expert Comment

by:gheist
ID: 24087493
Can you use wireshark to check what is going on in HTTP session?
0
 
LVL 61

Expert Comment

by:gheist
ID: 24095023
I could not reproduce your problem. So all the failure was in the way you packaged kannel for installation. It is not your fault. Instructions off the web tend to age and walk away from real systems. System builders unlike you or me know their job well.
0

Featured Post

Free camera licenses with purchase of My Cloud NAS

Milestone Arcus software is compatible with thousands of industry-leading cameras for added flexibility. Upon installation on your My Cloud NAS, you will receive two (2) camera licenses already enabled in the software. And for a limited time, get additional camera licenses FREE.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Need WiFi? Often, there are perfectly good networks that don't have WiFi capability - and there's a need to add it.  - Perhaps you have an Ethernet port into a network but no WiFi nearby. - Perhaps you have a powerline extender and no WiFi at the…
If you're not part of the solution, you're part of the problem.   Tips on how to secure IoT devices, even the dumbest ones, so they can't be used as part of a DDoS botnet.  Use PRTG Network Monitor as one of the building blocks, to detect unusual…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

863 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

18 Experts available now in Live!

Get 1:1 Help Now