<div>
<div class="content wysiwyg-content">
I'm trying to team 2 intel Pro/100EB nics to a Cisco 3750 swtich. &nbsp;I created the team correctly and I've created the channel-group on the cisco switch.<br />
<br />
I'm doing a IEEE 802.3ad Dynamic Link Aggegation on the 2 cards. &nbsp;and I set the channel-group to mode active. &nbsp;so its in LACP. &nbsp;<br />
<br />
I do a summary on the switch I see this.<br />
12 &nbsp; &nbsp; Po12(SU) &nbsp; &nbsp; &nbsp; &nbsp;LACP &nbsp; &nbsp; &nbsp;Gi1/0/21(P) Gi1/0/22(s)<br />
<br />
Notice the (s). &nbsp;The port on the switch is also amber for the second NIC in the team. <br />
<br />
I'm very confused on this why would it show suspended and amber?<br />
<br />
Shane
</div>
</div>


I'm trying to team 2 intel Pro/100EB nics to a Cisco 3750 swtich.  I created the team correctly and I've created the channel-group on the cisco switch.

I'm doing a IEEE 802.3ad Dynamic Link Aggegation on the 2 cards.  and I set the channel-group to mode active.  so its in LACP.  

I do a summary on the switch I see this.
12     Po12(SU)        LACP      Gi1/0/21(P) Gi1/0/22(s)

Notice the (s).  The port on the switch is also amber for the second NIC in the team. 

I'm very confused on this why would it show suspended and amber?

Shane

Teaming Intell Pro/1000EB nics

A switch is a device that filters and forwards packets of data between LAN segments. Switches operate at the data link layer or the network layer of the Open Systems Interconnection (OSI) Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case of Ethernet networks, switched Ethernet LANs. A hub is a connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports; when a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.