?
Solved

connecting a 2950 switch to 4000 series switch

Posted on 2009-04-08
1
Medium Priority
?
235 Views
Last Modified: 2012-05-06
We installed accidentally a 2950 switch to an exisiting 4000 series switch. Suddenly our network team noticed span tree errors and looping. It seems as though the ports that were connected defaulted to trunking. Just wonderring if this is the norm for cisco switches and what we could have done to avoid that.
0
Comment
Question by:coupler
1 Comment
 
LVL 6

Accepted Solution

by:
ajeab earned 2000 total points
ID: 24100648
do you have vlan??  by default all port function as regular not trunk unless you configure it. or it could be the other way around.  4000 port could be set as trunk and 2950 set as standard.  
0

Featured Post

Get your problem seen by more experts

Be seen. Boost your question’s priority for more expert views and faster solutions

Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

As companies replace their old PBX phone systems with Unified IP Communications, many are finding out that legacy applications such as fax do not work well with VoIP. Fortunately, Cloud Faxing provides a cost-effective alternative that works over an…
Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…
Monitoring a network: why having a policy is the best policy? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the enormous benefits of having a policy-based approach when monitoring medium and large networks. Software utilized in this v…

590 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question