Solved

Office Communications 2007 R2

Posted on 2009-04-08
4
1,423 Views
Last Modified: 2013-11-29
We are looking to test the new Office Communications 2007 R2 and I have installed the Enterprise edition and we are not interested in attaching it to the outside world at the moment.
I have the ability now to add users and connect to the server and we have chat and Presence but none of the multi part meeting parts will work.
If we try to have a 3 party meeting it fails and if we try the meet now button it fails as well.
I get this in the event log after a failed meeting:
An HTTP application request sent to an Mcu or Service timed-out. Requests will be retried but if this error continues to occur functionality will be affected.

Url: https://jmpool01.jayman.com:444/LiveServer/MCUFactory/
Cause: Network issues, non-provisioned MCU or non-functional MCU.
Resolution:
Ensure that the Service is provisioned and functioning correctly. If any network related errors are reported by the Service ensure that they are resolved.
0
Comment
Question by:JaymanMasterBuilt
  • 2
4 Comments
 
LVL 10

Accepted Solution

by:
jayca earned 125 total points
ID: 24103655
Goto the global settings, and modify the default meeting policy.  It is probably set to not allow web conferences by default.

Did you run the validation wizard? If so post the results.

Jay
0
 
LVL 10

Assisted Solution

by:abdulwrite
abdulwrite earned 125 total points
ID: 24169510
Make sure 8057 port and required ports needs to be opened for that funtionality.

Check out : (http://theucguy.wordpress.com/2009/02/25/ocs-r2-updates-about-the-firewall-requirements-for-external-user-access/)
0
 

Author Comment

by:JaymanMasterBuilt
ID: 24896468
I found the problem was due to a error in the SSL cert, even though I requested the alternate names in the SSL Request they were not included in the final cert. Once this was fixed and the Alternate server names were in the Cert then things worked out.
0
 

Author Closing Comment

by:JaymanMasterBuilt
ID: 31568206
Thanks for the response guys.
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
ADMT Intra Forest migration questions 7 217
Questions about DHCP migration 5 82
How to Disable screen lock using group policy 10 45
User wants to log with Username or Email 4 53
1. Boot PC and press F10, select storage options and change the compatibility from “AHCI” to “IDE”, save and exit 2. Boot PC and press F12 3. Upon PXE display of searching for DHCP server, press Pause break to obtain MAC address 3. Open Configu…
Remote Desktop Protocol or RDP has become an essential tool in many offices. This article will show you how to set up an external IP to point directly to an RDP session. There are many reasons why this is beneficial but perhaps the top reason is con…
Although Jacob Bernoulli (1654-1705) has been credited as the creator of "Binomial Distribution Table", Gottfried Leibniz (1646-1716) did his dissertation on the subject in 1666; Leibniz you may recall is the co-inventor of "Calculus" and beat Isaac…

827 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question