Solved

Session Info From BEA Weblogic Console

Posted on 2009-04-08
8
797 Views
Last Modified: 2013-12-10
Session Info From Weblogic Console:-
we are using weblogic 8.1
We  can get the information about the sessions from the weblogic admin console but the information is lost when the browser is closed.

We want to capture this information. say for example :- How many users are there at a particular time?

How can we achieve this??  Any help will be appreciated.

0
Comment
Question by:ballioballi
  • 5
  • 3
8 Comments
 
LVL 10

Expert Comment

by:rajesh_bala
ID: 24107194
Can you be more specific on what you are trying to do.
0
 

Author Comment

by:ballioballi
ID: 24134564
1. I login to the weblogic console as system/password and see the total number of concurrent sessions.It says 20 sessions.(for example)

2. I want to capture this information every hour  with some script so that I need not to login again and again every hour.

3. The requirement is that the management wants the login information every hour. Right now I am just login every hour and capture this information and put it in an excel sheet but I could not able to take this information between 10PM -6AM.

This is what is my requirement. Please let me know if I explained it properly.


0
 

Author Comment

by:ballioballi
ID: 24144400
I mean the "total active sessions count in weblogic 8.1"

Hope, It make sense now.
0
Is Your AD Toolbox Looking More Like a Toybox?

Managing Active Directory can get complicated.  Often, the native tools for managing AD are just not up to the task.  The largest Active Directory installations in the world have relied on one tool to manage their day-to-day administration tasks: Hyena. Start your trial today.

 
LVL 10

Expert Comment

by:rajesh_bala
ID: 24146138
Yeah, I do understand it clearly now.

Can you check the following link. you might have to modify a little bit and replace with your values to get this

http://psadmin.blogspot.com/2008/02/weblogic-monitoring-scripts.html
0
 
LVL 10

Accepted Solution

by:
rajesh_bala earned 500 total points
ID: 24146170
You can also try the following weblogic.Admin to ensure you are getting right value.

1. open a command prompt.
2. Navigate to \bin folder. run setDomainEnv.sh/setDomainEnv.cmd. This will set appropriate classpaths etc.
3. Run the following command. Please change it according to your webapps and server names.

java weblogic.Admin -username weblogic -password weblogic GET -pretty -mbean "examples:ApplicationRuntime=examplesServer_examplesWebApp,Location=examplesServer,Name=examplesServer_examplesServer_examplesWebApp_examplesWebApp,ServerRuntime=examplesServer,Type=WebAppComponentRuntime" -property OpenSessionsCurrentCount

This would print the number of open sessions in the system. ENSURE YOU CHANGE THE SERVERNAME AND WEBAPP NAME.
0
 

Author Comment

by:ballioballi
ID: 24413970
I am not able to find setDomainEnv.sh.

I have ./setEnv.sh only.

Thanks,
0
 

Author Comment

by:ballioballi
ID: 24415527
java weblogic.Admin -username weblogic -password weblogic GET -pretty -mbean "examples:ApplicationRuntime=examplesServer_examplesWebApp,Location=examplesServer,Name=examplesServer_examplesServer_examplesWebApp_examplesWebApp,ServerRuntime=examplesServer,Type=WebAppComponentRuntime" -property OpenSessionsCurrentCount


You just said to put 2 variables but I am confused with so many variables:-

I am rewriting it :-

change username ----system          (I got this)
change password-----password       (I got this)


what is ---- 1.  ApplicationRuntime=examplesServer_examplesWebApp
                   2.  Location=examplesServer
                   3   Name=examplesServer_examplesServer_examplesWebApp_examplesWebApp
                    4. ServerRuntime=examplesServer
                    5. Type=WebAppComponentRuntime
Please clarify.
   
0
 

Author Closing Comment

by:ballioballi
ID: 31568365
NOT WORKED
0

Featured Post

Simplifying Server Workload Migrations

This use case outlines the migration challenges that organizations face and how the Acronis AnyData Engine supports physical-to-physical (P2P), physical-to-virtual (P2V), virtual to physical (V2P), and cross-virtual (V2V) migration scenarios to address these challenges.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

This exercise is about for the following scenario: Dmgr and One node with 2 application server. Each application server contains it owns application. Application server name as follows server1 contains app1 server2 contains app1 Prereq…
This article is about some of the basic and important steps to be used to improve the performance in web-sphere commerce application development. 1) Always leverage the Dyna-caching facility provided by the product 2) Remove the unwanted code …
This Micro Tutorial will give you a basic overview how to record your screen with Microsoft Expression Encoder. This program is still free and open for the public to download. This will be demonstrated using Microsoft Expression Encoder 4.
Nobody understands Phishing better than an anti-spam company. That’s why we are providing Phishing Awareness Training to our customers. According to a report by Verizon, only 3% of targeted users report malicious emails to management. With compan…

770 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question