Solved

Cisco ASA VPN configuration

Posted on 2009-04-09
2
307 Views
Last Modified: 2012-05-06
Hi,
I have an ASA5510 that has bot site-to-site VPN setup and remote access VPN on the outside interface.

Now, I want users who connect via remote access VPN to access the subnet on the remote end of the site-to-site VPN. Is this possible?

Thanks in advance.
0
Comment
Question by:inoc
2 Comments
 
LVL 4

Accepted Solution

by:
SimWhite earned 500 total points
ID: 24113220
0
 

Author Closing Comment

by:inoc
ID: 31568785
also needed this command:

       same-security-traffic permit intra-interface
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Palo Alto Networks - find the sec zone 3 64
ASA 5505 latency problem 8 45
port redirection on cisco asa 5520 5 16
Poll Active Directory user information 11 41
Secure VPN Connection terminated locally by the Client.  Reason 442: Failed to enable Virtual Adapter. If you receive this error on Windows 8 or Windows 8.1 while trying to connect with the Cisco VPN Client then the solution is a simple registry f…
This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

839 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question