Solved

how do I put cisco vpn router in fortiguard 60 dmz for cisco vpn clients

Posted on 2009-04-11
2
406 Views
Last Modified: 2012-05-06
Trying to setup Cisco VPN router in the DMZ of the fortiguard 60. Have been unsuccessful. Any help would be appreciated.
0
Comment
Question by:DSevier
2 Comments
 
LVL 7

Accepted Solution

by:
EmpKent earned 500 total points
ID: 24123274
Forward the correct prots or ports depending on the type of VPN you will be using to the IP of the Cisco in the DMZ. You can assign it a separate public IP and static NAT it if you like as well.

Thanks,

Kent
0
 

Author Comment

by:DSevier
ID: 24142087
thank you. I will try this and let you know.
0

Featured Post

Free Tool: ZipGrep

ZipGrep is a utility that can list and search zip (.war, .ear, .jar, etc) archives for text patterns, without the need to extract the archive's contents.

One of a set of tools we're offering as a way to say thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

One of the Top 10  common Cisco VPN problems are not-matching shared keys. This is an easy one to fix, but not always easy to notice, see the case below. A simple IPsec tunnel between fast Ethernet interfaces of routers SW1 (f1/1) and R1(f0/0). …
I've written this article to illustrate how we can implement a Dynamic Multipoint VPN (DMVPN) with both hub and spokes having a dynamically assigned non-broadcast multiple-access (NBMA) network IP (public IP). Here is the basic setup of DMVPN Pha…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

860 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question