Solved

How to setup 2 different WANs on Fortinet 60 B ?

Posted on 2009-04-12
3
797 Views
Last Modified: 2012-05-06
Hi -
I own a fortinet 60 B that have 2 WAN ports, 1 and 2. Currently Internet connection is on WAN 2 and working perfect, distibute internet to the internal network. So far so good.
Then I also want internet access on WAN 1, but on a separate network from WAN 2.
Is it possible that WAN 1 can share the WAN 2 internet connection somehow but in the same time be a "own network" with own IP range and so on. ?

Please advice.  
Bjørn.
0
Comment
Question by:btn003
  • 2
3 Comments
 
LVL 2

Accepted Solution

by:
Jhunjoe earned 500 total points
ID: 24127853
I believed what you meant is a separate subnet in Lan.
i think that are 4 lan or 5 lan in fg60b.
firstly you need to switch to interface mode but before you do that you need to do a backup of your config file.
after you need to do a nat to your new subnet.
0
 

Author Comment

by:btn003
ID: 24128866
Hi -

Yes, it sounds like what I need.
There are several lan ports in Fortinet. Now port 1 is output of my main network. The rest of the ports are unused.

I still dont know how to create a separate subnet and to "map" it to Fortinet lan port 2?

KInd r

Bjørn-T
0
 

Author Closing Comment

by:btn003
ID: 31569351
Problem solved
0

Featured Post

Free Tool: Postgres Monitoring System

A PHP and Perl based system to collect and display usage statistics from PostgreSQL databases.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When it comes to security, there are always trade-offs between security and convenience/ease of administration. This article examines some of the main pros and cons of using key authentication vs password authentication for hosting an SFTP server.
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

821 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question