Solved

What needs to be done to add a 2nd network card to a sbs 2003 server?

Posted on 2009-04-13
4
229 Views
Last Modified: 2012-05-06
I currently have a sbs2003 connected from the modem-router (DFL-200)-switch-server/clients.

I want to setup a VPN, and have tryed all the correct step thats have worked flawlessly on 2 other servers.  The correct ports are forwarded yet I still get 800 error.  1723 is listening and still the 800.

If I set up a PPTP server and username on the DFL-200 it results in a 691 error so not getting into the server just the router.

I think if I add another network card I can alleviate a lot of my problems as the other server work fine and the only difference is 2 nic cards to one.

With that being said, what do I have to do to add another Nic?  If anyone thinks they can help me with the current VPN problem, let me know and I will create another question.
0
Comment
Question by:JeramieD
  • 2
  • 2
4 Comments
 
LVL 7

Expert Comment

by:Thomas Wheeler
ID: 24133613
Have you thought about changing the router? Did you make sure you have pptp pass through enabled on the router? Also you mentioned port forwarding for 1723 what about protocol 47 GRE?
0
 

Author Comment

by:JeramieD
ID: 24134228
I have thought about changing the router, but dont want to commit until I am sure that is the issue.

I have opened 47... will check the pptp passthrough.
0
 
LVL 7

Accepted Solution

by:
Thomas Wheeler earned 500 total points
ID: 24134237
have you thought about removing the router and testing pptp to verify?
0
 

Author Closing Comment

by:JeramieD
ID: 31569710
I have now....and it worked.  Thanks.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Secure VPN Connection terminated locally by the Client.  Reason 442: Failed to enable Virtual Adapter. If you receive this error on Windows 8 or Windows 8.1 while trying to connect with the Cisco VPN Client then the solution is a simple registry f…
OpenVPN is a great open source VPN server that is capable of providing quick and easy VPN access to your network on the cheap.  By default the software is configured to allow open access to your network.  But what if you want to restrict users to on…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

943 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

7 Experts available now in Live!

Get 1:1 Help Now