Solved

Setting up Static Routing Between Two Datacentre Sites Linked by a Cross Connect Cable

Posted on 2009-04-14
3
361 Views
Last Modified: 2012-05-06
Hi All,

I have 2 datacentre sites which are now linked together by a Cross Connect Cable, provided by a 3rd party specialist. Each site has it's own independant internet feed as well.

My aim is to be able to link both sites together so that they can talk to each other without having to go out through the internet, hence the purpose of getting the cross connection installed. So far, I have setup the plans for the network but am not 100% sure if it will work. As I am working on a production environment it would be helpful is someone can confirm whether or not my plan will work, and also recommend any changes if necessary.

I have attached a network diagram of what I have come up with so far and would like your input. The internal routers are HP 2610's and the firewalls are Juniper SSG's. The install is in a datacentre which is why most the devices have public IP addresses. I was hoping to be able to get this working through Static Routes, although I know this can get a little complex as the network grows.

Looking forward to getting your input.

Regards, Harry.
networksetup.jpg
0
Comment
Question by:icemedia
  • 2
3 Comments
 
LVL 8

Accepted Solution

by:
API_NOC earned 250 total points
ID: 24137312
What you have in your diagram for static routing is correct.  One question though, why do you need to get to the firewall public subnets across each data center?  If you have a reason for it, then no worries - everything looks correct.
0
 

Author Comment

by:icemedia
ID: 24146207
Thanks API_NOC,

Any recommendations on changing the configuration in any way. I want to ensure I have the fastest possible setup between the two sites, currently running at about 20Mbps.

If all is well and hoping that the 16 block IP's are issued relatively quickly, I plan to launch this next weekend.

Regards.
0
 

Author Comment

by:icemedia
ID: 24146309
i.e. Any need for VLANs here?
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

I eventually solved a perplexing problem setting up telnet for a new switch.  I installed a new Cisco WS-03560X-24P switch connected to an existing Cisco 4506 running a WS-X4013-10GE Sup II-Plus. After configuring vlans and trunking,  I could no…
Use of TCL script on Cisco devices:  - create file and merge it with running configuration to apply configuration changes
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

791 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question