Solved

Duplicated Volumes on Windows Server 2008 with HP SC08Ge and HP MSA2012sa

Posted on 2009-04-14
3
962 Views
Last Modified: 2013-11-14
Hi,

I have a HP MSA2012sa  dual controller storage and a dual-port Host Bus Adapter (HP SC08Ge). Each of my HBA ports is connected with one port of each controller. When i map the volumes from the storage to the server i can see each volume twice in the disk management console.

The aim of this configuration is a windows fail-over cluster (so a further server with the same controller will be added).

What am I doing wrong???

Regards

Robert
0
Comment
Question by:rranftler
  • 2
3 Comments
 
LVL 7

Assisted Solution

by:dolomiti
dolomiti earned 200 total points
ID: 24137937
hi,
try to install multi path software.
See on HP support what about MPIO driver
bye
vic
0
 

Accepted Solution

by:
rranftler earned 0 total points
ID: 24175568
There is no Driver needed for Windows Server 2008 - I had to activate the MPIO feature....
0
 
LVL 7

Expert Comment

by:dolomiti
ID: 24178346
hi rranftler,
thank for your feedback:
I am very interested about outcome of the problems.

Sometime authors, accept answers, assign points, or do nothing,
without comment how they resoveld or not problems:
this way is not good for general knowledgement.

bye
vic
0

Featured Post

Get up to 2TB FREE CLOUD per backup license!

An exclusive Black Friday offer just for Expert Exchange audience! Buy any of our top-rated backup solutions & get up to 2TB free cloud per system! Perform local & cloud backup in the same step, and restore instantly—anytime, anywhere. Grab this deal now before it disappears!

Join & Write a Comment

Ever notice how you can't use a new drive in Windows without having Windows assigning a Disk Signature?  Ever have a signature collision problem (especially with Virtual Machines?)  This article is intended to help you understand what's going on and…
Data center, now-a-days, is referred as the home of all the advanced technologies. In-fact, most of the businesses are now establishing their entire organizational structure around the IT capabilities.
This tutorial will walk an individual through the steps necessary to configure their installation of BackupExec 2012 to use network shared disk space. Verify that the path to the shared storage is valid and that data can be written to that location:…
This tutorial will walk an individual through the steps necessary to install and configure the Windows Server Backup Utility. Directly connect an external storage device such as a USB drive, or CD\DVD burner: If the device is a USB drive, ensure i…

744 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now