Solved

Access Points can not share IP

Posted on 2009-04-14
5
427 Views
Last Modified: 2013-11-12
Dear experts

I got following problem:
I bought a D-Link AP DAP 2590, and tried to connect it to our company network, the settings went fine until when i tried to connect the AP with my wireless using laptop, issue occured, the wireless is asking for IP all the times... non stops...

I know its some kind of problem in DHCP, we are using windows 2003 r2 as our DHCP server.
In the AP i also tried to point DHCP IP. Still not working better.

I wonder if i need to config anything to the server? And how to fix the problem?

Thx
0
Comment
Question by:Handersson75
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
5 Comments
 
LVL 6

Accepted Solution

by:
ngailfus earned 500 total points
ID: 24140579
Try a repair of your wireless NIC.  Right click the icon in the system tray and click on Repair.  If it still does not connect, make sure your encryption keys are correct if you are using a pre-shared key system such as WEP or WPA-PSK.  
0
 
LVL 1

Author Comment

by:Handersson75
ID: 24141647
I tried on 3 PC same problem... I am not sure if the repair would fix the problem. Encryption is WPA-PSK also WPA2.
0
 
LVL 6

Expert Comment

by:ngailfus
ID: 24142500
Do you get a DHCP responce when you are wired?  The D-Link is an access point correct?  Not a router/firewall?  If it is a router you may want to look to see if you can put it into access point mode.  It could be blocking DHCP traffic from passing through.
0
 
LVL 1

Author Comment

by:Handersson75
ID: 24142655
When i get wired i need to set the AP to a static IP to config it or dynamic IP to check DHCP setting in server to know which IP it got, That D-link is a AP you can go check it out, D.Link DAP 2590, a AP.
0
 
LVL 1

Author Closing Comment

by:Handersson75
ID: 31569969
Well it was auth problem, in the pass i got text like: ¤%& and somehow the WPA and computer dont communicate with those in password.
0

Featured Post

Enroll in June's Course of the Month

June's Course of the Month is now available! Every 10 seconds, a consumer gets hit with ransomware. Refresh your knowledge of ransomware best practices by enrolling in this month's complimentary course for Premium Members, Team Accounts, and Qualified Experts.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In the modern office, employees tend to move around the workplace a lot more freely. Conferences, collaborative groups, flexible seating and working from home require a new level of mobility. Technology has not only changed the behavior and the expe…
This paper addresses the security of Sennheiser DECT Contact Center and Office (CC&O) headsets. It describes the DECT security chain comprised of “Pairing”, “Per Call Authentication” and “Encryption”, which are all part of the standard DECT protocol.
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…

696 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question