Solved

installing a line card in a 4507r

Posted on 2009-04-14
2
247 Views
Last Modified: 2012-05-06
is there anything to this? I was told I can just slide it in and screw it in.  It is hot swappable right? Any commands I need to issue after installation?

thanks
0
Comment
Question by:dissolved
2 Comments
 
LVL 43

Accepted Solution

by:
JFrederick29 earned 500 total points
ID: 24142769
Typically yes.

The chassis supports OIR but its best to verify per line card whether it supports online insertion.  What module are you installing (model number)?

If it is an interface line card, there is no config to bring it up, the ports will be ready to config.
0
 

Author Comment

by:dissolved
ID: 24142853
its a 48 port poe module. I can't remember off the top of my head since i'm home now. Ends in RV I believe

Thanks as always J
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Low Cost Managed Switch 19 107
Cisco stacked switches monitoring 4 87
Alcatel Lucent OS6450 switch randomly reboots 4 64
Classlful vs Classless subneting 18 67
This tutorial will go through the steps required to write a script that will back up the configuration settings of a HP-ProCurve switch. You will need to get the following things to follow this tutorial: Telnet Scripting Tool e.g. TST10.exe …
I eventually solved a perplexing problem setting up telnet for a new switch.  I installed a new Cisco WS-03560X-24P switch connected to an existing Cisco 4506 running a WS-X4013-10GE Sup II-Plus. After configuring vlans and trunking,  I could no…
This Micro Tutorial will give you a basic overview how to record your screen with Microsoft Expression Encoder. This program is still free and open for the public to download. This will be demonstrated using Microsoft Expression Encoder 4.
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

776 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question