Solved

can log into vpn, cant ping anything

Posted on 2009-04-14
4
203 Views
Last Modified: 2012-05-06
as the title states, can use my cisco vpn client to get in, but cant ping anything on the corporate side. Any ideas?  It worked great until I switched from a soho router at my house, to a pix506e
0
Comment
Question by:dissolved
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
4 Comments
 
LVL 43

Accepted Solution

by:
JFrederick29 earned 500 total points
ID: 24144132
You need to make sure the headend VPN server has NAT-Traversal enabled.

If a PIX:

crypto isakmp nat-traversal
0
 

Author Comment

by:dissolved
ID: 24148072
no crypto isakmp nat-traversal was in my pix. If I enable it, it won't break any of the site to site VPNs right? This pix has site to site and RAS from home coming in

Thanks j
0
 
LVL 43

Expert Comment

by:JFrederick29
ID: 24148759
No, it won't break anything.
0
 

Author Closing Comment

by:dissolved
ID: 31570245
J is the man!
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

We've been using the Cisco/Linksys RV042 for years as: - an internet Gateway - a site-to-site VPN device - a leased line site-to-site subnet-to-subnet interface (And, here I'm assuming that any RV0xx behaves the same way as an RV042.  So that's …
Creating an OSPF network that automatically (dynamically) reroutes network traffic over other connections to prevent network downtime.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Suggested Courses

726 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question