Solved

Multiple Windows Server with Shared Responsibility

Posted on 2009-04-15
1
261 Views
Last Modified: 2012-05-06
Hi Experts,

I am setting up my office network and encountered some problems.

I have 2 physical servers and both are installed with Windows Server 2008 Enterprise Edition x64. Lets name these two server A and B.

On one of the Ethernet port on Server A will be connected to dedicated IP address for external internet. The other Ethernet port on Server A will be connected to a switch.

Server B will have one of the Ethernet port connected to Dynamic IP address for external internet. The other Ethernet port on Server B will be connected to the switch.

Server A will be used for IIS (Web Server)
Server B will be used for Active Directory, VPN access, Terminal Server

There are multiple computers running Windows Vista that will be connected to the switch as well.


===================
My Question
===================
Since server B do not have a dedicated IP address, is there any ways that I can allow people to connect to Server A and then depends on type of connection request (lets say VPN) and forward it accordingly to different internal server? (In this case, VPN should be forward to Server B).


Please tell me if further clearification are needed.

Thanks
0
Comment
Question by:geoffryf
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 11

Accepted Solution

by:
asdlkf earned 500 total points
ID: 24147740
look into sspi. its a new tunneling protocol available with server 2008 that will do what your asking for.


alternatly, you could just port forward from the public ip on server a to the wlan port of server b.
0

Featured Post

Complete VMware vSphere® ESX(i) & Hyper-V Backup

Capture your entire system, including the host, with patented disk imaging integrated with VMware VADP / Microsoft VSS and RCT. RTOs is as low as 15 seconds with Acronis Active Restore™. You can enjoy unlimited P2V/V2V migrations from any source (even from a different hypervisor)

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
SonicWall Max Connection Setting 7 41
GPO reset 2 45
Cost to upgrade from Windows Server 2008 to Server 2008 R2 3 75
SonicWall blocking access to MS RDP RemoteApp 24 41
A safe way to clean winsxs folder from your windows server 2008 R2 editions
I had an issue with InstallShield not being able to use Computer Browser service on Windows Server 2012. Here is the solution I found.
This tutorial will walk an individual through setting the global and backup job media overwrite and protection periods in Backup Exec 2012. Log onto the Backup Exec Central Administration Server. Examine the services. If all or most of them are stop…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

733 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question