Solved

vpn with linksys rv082 without static ip

Posted on 2009-04-15
5
587 Views
Last Modified: 2012-05-06
I have two Linksys RV082. i want to create a vpn tunnel with same routers and without a static IP. pls let me know step by configuration for same.

also let me know can i create  only with 1 router(RV 082) and a desktop with internet connection without static IP i think it is possible but i don't know how?
0
Comment
Question by:techasso
  • 2
  • 2
5 Comments
 
LVL 33

Expert Comment

by:MikeKane
ID: 24148070
I don't think this is possible.   At least 1 of the devices would need a static IP address so that the dynamic Ip'd device could establish a tunnel.  
0
 
LVL 4

Expert Comment

by:rjdennis
ID: 24151229
You should be able to use a dynamic DNS service such as dyndns.org to do that.  
0
 
LVL 1

Author Comment

by:techasso
ID: 24154512
<You should be able to use a dynamic DNS service such as dyndns.org to do that>.  but after that what i have to do?
0
 
LVL 4

Expert Comment

by:rjdennis
ID: 24169547
I no longer have access to the RV082's so I don't recall the exact steps, but when you configure the tunnel you should have an option to use a dyndns address i.e. yourvpnserver.dyndns.org instead of an ip address.  
0
 
LVL 1

Accepted Solution

by:
techasso earned 0 total points
ID: 24609119
ok now it is possible without static IP. see linksys support.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Secure VPN Connection terminated locally by the Client.  Reason 442: Failed to enable Virtual Adapter. If you receive this error on Windows 8 or Windows 8.1 while trying to connect with the Cisco VPN Client then the solution is a simple registry f…
This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

773 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question