Want to protect your cyber security and still get fast solutions? Ask a secure question today.Go Premium

  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 259
  • Last Modified:

Error on cat 6509 interfaces

Error on point to point gig interface
328 input errors, 21 CRC, 5270 frame, 0 overrun, 0 ignored

- This is 1 gig point to point between 2 offices
- I ask my server provider to check the line - the line has been tested and no malfunction
- My service privider has replaced its prisma gear the problem persists.:
- I replace fibers line and SPF problem still persists
- I clear counter on the interfaces the problem still persists
- The error resides on only one router ( the local router)
- Traffic at remote to the local office is very slow

Please help
1 Solution
If you are receiving errors only on the local router than you problem is likely at the remote site. I would say the typical cause for this would be a bad GBIC/SFP but you have stated that you have already replaced those. Do you have a different interface (SFP slot) you could try using at the remote site? It could be the port controller at that end going bad.

Featured Post

Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Tackle projects and never again get stuck behind a technical roadblock.
Join Now