• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 417
  • Last Modified:

ASA5505, can't SSH in all of a sudden

We have an ASA5505 at our backup site/co-location. Solarwinds reported that last night it went down and then came back up 3 minutes later.

Right now, I can ping this device from headquarters, but can't SSH in. I ran ethereal during an attempted SSH session. The three way handshake completed, so I know port 22 is still open.

All other devices at the co-location are accessible. Any ideas? I can ping it like I said, so the routing must be in place.
0
dissolved
Asked:
dissolved
  • 3
  • 2
1 Solution
 
dissolvedAuthor Commented:
4/21/2009 8:47:22 AM      172.16.101.254      Emergency      %ASA-0-716507: Fiber scheduler has reached unreachable code. Cannot continue, terminating
0
 
nasirshCommented:
can you telnet it or can you access via web.
0
 
dissolvedAuthor Commented:
no. We have a machine with a console cable connected to it. And I consolled in successfully, then I saw something about a memory leak and now we can't even console in
0
 
nasirshCommented:
ok do one thing. Try to change the port speed if you are using putty or secure crt. If it doesn't work then could it be  possible for you then reload it then at the boot prompt press escape and try to write boot flash:flashname.
0
 
dissolvedAuthor Commented:
we rebooted it and it worked
0

Featured Post

Will You Be GDPR Compliant by 5/28/2018?

GDPR? That's a regulation for the European Union. But, if you collect data from customers or employees within the EU, then you need to know about GDPR and make sure your organization is compliant by May 2018. Check out our preparation checklist to make sure you're on track today!

  • 3
  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now