• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 197
  • Last Modified:

Setting up RAS

Can someone give me instructions on doing this on an ASA5505. I have done this on a pix506e, never an ASA.
I have the vpn pool defined. I also have a Radius server which will be used, but I'm not sure how to include it
0
dissolved
Asked:
dissolved
  • 2
1 Solution
 
JFrederick29Commented:
As far as the RADIUS config goes, here is an example:

First define your RADIUS server:

aaa-server RADIUS protocol radius
aaa-server RADIUS (inside) host 10.1.1.10
key <radiuskey>

Then instruct the tunnel-group to use RADIUS for authentication.

tunnel-group "remotevpn" type remote-access
tunnel-group "remotevpn" general-attributes
 authentication-server-group RADIUS


0
 
dissolvedAuthor Commented:
thanks, are the rest of the commands pretty similar to the pix for setting up the rest?
0
 
JFrederick29Commented:
As far as setting up remote access VPN you mean?  Yes, very similar.  Using ASDM and the VPN wizard helps also if you want to go that route.
0

Featured Post

What Security Threats Are We Predicting for 2018?

Cryptocurrency, IoT botnets, MFA, and more! Hackers are already planning their next big attacks for 2018. Learn what you might face, and how to defend against it with our 2018 security predictions.

  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now