aclv
asked on
PIX-501 Setting up a extra IP to point ot a website
Hi, I have never used a PIX before and now i have inherited one on a hosted website. I added an external IP to the website and i need to have the PIX direct that external ip address to the internal ip address of the web server. I have no idea where to start. I am using PIX Device manager 3.0
any help would be great
any help would be great
ASKER
thanks for that information, however i would like to use the PIX device manager if at all possible. any idea where i can find info on that ?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
1 - Create a Static Mapping from an external IP to the internal IP or forward a single port from the outside to an single port to the inside
2 - Create/Edit the ACL controlling access on the inbound traffic to allow ports 80/443 in to the external IP that you chose.
Here is a sample showing how to forward a port:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080862017.shtml
This sample shows how to create a 1 to 1 static for a mail server, its the same thing only use port 80 and 443 instead.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008067cf3b.shtml