Want to protect your cyber security and still get fast solutions? Ask a secure question today.Go Premium


Configuring a Nortel Contivity 1100 Gateway Address

Posted on 2009-04-25
Medium Priority
Last Modified: 2013-11-30
I am trying to configure a Nortel Contivity 1100, I have it all setup to use IPSec security, but once I log in with the Nortel Client, I don't get a gateway?  I can't seem to find this in the Nortel User interface.  I can set the Subnet, etc, but can't find the gateway.  Anyone know how to do this?  Which section it is in?  
Question by:kesea
1 Comment

Accepted Solution

willbaclimon earned 1000 total points
ID: 24297779

What code verision is it? Sounds old. You can set the gateway in the Web UI under Routing (Static)

Featured Post

Evaluating UTMs? Here's what you need to know!

Evaluating a UTM appliance and vendor can prove to be an overwhelming exercise.  How can you make sure that you're getting the security that your organization needs without breaking the bank? Check out our UTM Buyer's Guide for more information on what you should be looking for!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

At the beginning of the year, the IT world was taken hostage by the shareholders of LogMeIn. Their free product, which had been free for ten years, all of the sudden became a "pay" product. Now, I am the first person who will say that software maker…
If you use NetMotion Mobility on your PC and plan to upgrade to Windows 10, it may not work unless you take these steps.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

572 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question