patch and update Poweredge 2850 and powervault 220s

I have a Poweredge 2850 running esx update 3 and a powervault 220s attached for storage use. I need to update the firmware on the server and powervault. I have not done this before and I am looking for any ideas to get this done.
gilberto7920Asked:
Who is Participating?
 
that1guy15Connect With a Mentor Commented:
From support.dell.com go to drivers and downloads for the specific model. Under the System management section you will see PowerEdge Updates (.iso).

These are all the current hardware updates for this device.

Download the ISO and burn it to a CD. Then follow the directions provided from the downloads page to load the new firmware. I believe you can boot from the CD and select what to update.

Here is a link to the ISO for the PowerEdge 2850
http://support.dell.com/support/downloads/format.aspx?c=us&l=en&s=gen&deviceid=9796&libid=36&releaseid=R156221&vercnt=9&formatcnt=0&SystemID=PWE_PNT_P3C_2850&servicetag=&os=WNET&osl=en&catid=-1&impid=-1
0
 
gilberto7920Author Commented:
will this also apply to the powervault 220s
0
 
that1guy15Commented:
You would need to download the power vault 220 update ISO separately. Use the steps I listed above to download the ISO for the Power Vault
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.