Posted on 2009-04-30
Last Modified: 2012-05-06
I am using TLE V 3.2.  Rel 01  
I would like to know how can I call  in a CL  the options below from Translator menu
1. Inbound Interchange Receive
2. Inbound Interchanges Unpack
3. Inbound Messages Processing
4. Outbound Message Pack      
5. Outbound Interchange Send  

I need to put  option 1,2,3  in one CL ,  and options 4,5 in another CL,  I do not want to use the shceduler to call that options individually
I would like to know what are the parameters used in every program,  I could identify the unpacking and the packing processed,
CALL PGM(EDI622) PARM('000000000000      0      0000000' 0 '2')  

CALL PGM(EDI712) PARM('000000000000      0       000000' 0 '2')

But  I can not identify the 1.Inbound Receive and  5. Outbound Send processes

Please help
Question by:gsantillana
    LVL 34

    Expert Comment

    by:Gary Patterson

    I don't have V3.2 docs, but my V6.1.4 docs have all of the commands,API's, and documented program calls listed in the "Application Program and Interface Guide".

    - Gary Patterson

    Author Comment

    I have the V3.2 Documents but I can not find anything about these programs.

    Is there a way I can have those documents to take a look?
    or can you show me an example of one of these programs to see if I can use it in my TLE Version?
    LVL 34

    Expert Comment

    by:Gary Patterson
    I can't post the TL docs wholesale without their permission without violating their copyright.  The file on my documentation CD is called "api.pdf".  Do you have a similar document?

    - Gary Patterson

    Author Comment

    I understand
    No I do not have that document
    I just need the parameters to call programs EDI602C  and EDI736,  EDI733, EDI735,   I am not sure if these programs are the same in your TLE version
    LVL 34

    Expert Comment

    by:Gary Patterson
    Parms for those programs aren't documented in 6.1.4.  Most of these functions have command interfaces.  Do a WRKCMD *ALL in your TrustedLink program library.

    - Gary Patterson
    LVL 1

    Expert Comment

    I found this in some of my notes on TL, but I think its for 5.4.  Not sure if the same programs exist for 3.2.

    I think the API manuals are on a separate disk from the TL program.

    The program call CED810XB lets you call the TrustedLink communications
    program for the custom network in batch mode from outside TrustedLink.
    Call program CED810XB and pass one parameter.

    From/To Use Type Field Description
    1 Input Char (1) Action code
    1=Send, 2=Receive, 3=Send/Receive
    2-3 Input Char (2) Custom network identifier
    4-13 Input Char (10) Custom network program name
    14-16 Input Char (3) Custom network send record length
    17-19 Input Char (3) Custom network receive record length
    20-29 Input Char (10) Library where custom network program
    LVL 1

    Expert Comment

    I also found this, but again, I think it's for 5.4:

    You can choose from of the following programs provided depending on the
    type of communications you want to initiate. The programs are:
    CED8404B BSC communications CED8404B, CED8604B,
    CED8504B, CED8622B
    and CED8623B Parameters

    CED8604B SDLC communications
    CED8504B GEIS ONPFLU6.2 (GS) Network,
    SNA communications
    CED8622B IP Exchange (IX) Network
    CED8623B Cyclone Commerce (CC) Network
    CED8616B IBM FTP (IF) Network CED8616B Parameters on

    CED8620B IBM EX expEDIte Base/400 (EX) Network
    XML Exchange Network (XE) Network
    CED8620B Parameters on

    CED8624B Scripted FTP (SF, or network ID) Module CED8624B Parameters on

    Let me know if you have any of those programs on your 3.2 system and I'll see if I can find the parms listing for the programs you want.

    Accepted Solution

    Hi   Bryav

       I do not have these programs in 3.2,   but  what I found was  command  SNDEDIINT  and this helped me with the  Outbound Send Process
     About the Receive Inbound ,  what I did was  create a small program to write a request to the TLE Scheduler Request data queue  (EDISCH) once the scheduler read the data queue the inbound receive process was executed,   then I just call the others programs to do the Unpack and Process  (EDI622,  EDI642).  all in one CL  and it worked.

       Thank both of you for your help,  I really appreciate it

    Featured Post

    IT, Stop Being Called Into Every Meeting

    Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

    Join & Write a Comment

    Suggested Solutions

    Outlook Free & Paid Tools
    For Sennheiser, comfort, quality and security are high priority areas. This paper addresses the security of Bluetooth technology and the supplementary security that Sennheiser’s Contact Center and Office (CC&O) headsets provide.  
    This video discusses moving either the default database or any database to a new volume.
    Excel styles will make formatting consistent and let you apply and change formatting faster. In this tutorial, you'll learn how to use Excel's built-in styles, how to modify styles, and how to create your own. You'll also learn how to use your custo…

    728 members asked questions and received personalized solutions in the past 7 days.

    Join the community of 500,000 technology professionals and ask your questions.

    Join & Ask a Question

    Need Help in Real-Time?

    Connect with top rated Experts

    20 Experts available now in Live!

    Get 1:1 Help Now