<div>
You can only make a basic routing on a L3 switch, like static routes.<br />
AFAIK you can only do it from CLI.<br />
<a href="http://cdn.procurve.com/training/Manuals/3500-5400-6200-8200-MRG-Jan08-5-IP-Routing.pdf" rel="ugc">http://cdn.procurve.com/training/Manuals/3500-5400-6200-8200-MRG-Jan08-5-IP-Routing.pdf</a><br />
<br />
Afraid this is not what you hoped for.
</div>


You can only make a basic routing on a L3 switch, like static routes.
AFAIK you can only do it from CLI.
http://cdn.procurve.com/training/Manuals/3500-5400-6200-8200-MRG-Jan08-5-IP-Routing.pdf [http://cdn.procurve.com/training/Manuals/3500-5400-6200-8200-MRG-Jan08-5-IP-Routing.pdf]

Afraid this is not what you hoped for.

<div>
What are our other options then? &nbsp;We basically need to be able to redirect all of our port 80 outbound internet traffic to a proxy that is either internal to our network or external - we use a Cisco ASA 5520 router/firewall, would that be able to handle it?
</div>


What are our other options then?  We basically need to be able to redirect all of our port 80 outbound internet traffic to a proxy that is either internal to our network or external - we use a Cisco ASA 5520 router/firewall, would that be able to handle it?

<div>
<div class="content wysiwyg-content">
We are setting up our network to use a proxy server &amp;&nbsp;would like to avoid pushing out the proxy settings to our clients (and guests) - that said, we were looking at maybe taking our core switch (HP 5412zl) &amp;&nbsp;writing a routing statement that takes all port 80 &amp;&nbsp;port 443 traffic &amp;&nbsp;re-directs it to ProxyServer:1300, thus enabling the traffic to filter through directly.<br />
<br />
First of all - am I missing anything....second of all, can an HP 5412zl even do routing statements &amp;&nbsp;can it be done through the web interface?<br />
<br />
Thanks!
</div>
</div>


We are setting up our network to use a proxy server & would like to avoid pushing out the proxy settings to our clients (and guests) - that said, we were looking at maybe taking our core switch (HP 5412zl) & writing a routing statement that takes all port 80 & port 443 traffic & re-directs it to ProxyServer:1300, thus enabling the traffic to filter through directly.

First of all - am I missing anything....second of all, can an HP 5412zl even do routing statements & can it be done through the web interface?

Thanks!

Routing Statements on an HP 5412zl

A switch is a device that filters and forwards packets of data between LAN segments. Switches operate at the data link layer or the network layer of the Open Systems Interconnection (OSI) Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case of Ethernet networks, switched Ethernet LANs. A hub is a connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports; when a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.