Want to protect your cyber security and still get fast solutions? Ask a secure question today.Go Premium


Adtran 924e VRF BGP

Posted on 2009-05-01
Medium Priority
Last Modified: 2013-12-14
I'm trying to configure an Adtran 924e using a VRF. I need a eBGP session to come up within the VRF. The problem is that it doesn't appear that there is a way within the Adtran to configure BGP per VRF and it just keeps trying to use the Default routing table to establish the session.

On a Cisco, you could just do a "address-family ipv4 vrf" to achieve this. Is there something I'm missing for similar functionality in an Adtran?
Question by:ashke
  • 2
LVL 16

Accepted Solution

SteveJ earned 1000 total points
ID: 24397395
Call Adtran . . . they are extremely helpful.


Or go to their web page and open a support ticket. Unlike many router / network device companies you will very likely get a knowledgeable engineer who can answer this right away.

Good luck,
Steve (not an Adtran employee)

Author Comment

ID: 24408477
Thats what I did Steve. I just haven't updated the question. You cannot achieve this with the Adtran or within AOS. You also cannot assign an interface as a media-gateway source for RTP if that interface is within a VRF in case anyone was wondering.
LVL 16

Expert Comment

ID: 24411732
You should have just deleted the question instead of giving me a C.

Oh well.


Featured Post

Get expert help—faster!

Need expert help—fast? Use the Help Bell for personalized assistance getting answers to your important questions.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
I recently attended Cisco Live! in Las Vegas, a conference that boasted over 28,000 techies in attendance, and a week of hands-on learning hosted by a solid partner with which Concerto goes to market.  Every year, Cisco displays cutting-edge technol…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

572 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question