Solved

2 server in subnet, ping ok but domain controller not detected

Posted on 2009-05-04
4
355 Views
Last Modified: 2012-05-06
Hello,
I have a domain controller  W2000 with two nic
192.168.0.46 (In this network(net) there is the router 192.168.0.150)
192.168.2.46    The server W2003 with Ip 192.168.2.146 is a server of terminal server.
On having initiated it does not find the domain controller. To initiate it I have to disconnect the cable of network(net) because it was very slow. But I can  ping  to 192.168.0.46 (Dns), nslookup it  connects to the server, I cannot browser along Internet but a tracert www.google.com  is ok.
The strange thing is that the problem has been detected today, on Thursday it worked correctly.

Regards,
0
Comment
Question by:silviall
  • 2
  • 2
4 Comments
 
LVL 5

Expert Comment

by:ssmith764
ID: 24293815
Sounds like a DNS problem. Do you have dns settings correctly set in your terminal server?
0
 

Author Comment

by:silviall
ID: 24293863
I think so.
If I do.
nslookup

www.google.es  --> ok
hawai (server) --> ok

But I try web browser with IP it doesn't work. But I can ping the server.
0
 
LVL 5

Expert Comment

by:ssmith764
ID: 24296305
What does the terminal server have set for DNS? Looking at your setup it should be 192.168.2.46.
Does the terminal server have 2 nics also?
0
 

Accepted Solution

by:
silviall earned 0 total points
ID: 24312155
The problem was the switch. I'd replaced the switch, and all ok.
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Every server (virtual or physical) needs a console: and the console can be provided through hardware directly connected, software for remote connections, local connections, through a KVM, etc. This document explains the different types of consol…
PRTG Network Monitor lets you monitor your bandwidth usage, so you know who is using up your bandwidth, and what they're using it for.
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

856 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question