Solved

How to pass PPTP connection from netscreen firewall without using netscreen-remote?

Posted on 2009-05-04
4
483 Views
Last Modified: 2013-12-04
I have one static ip from ISP and windows SBS 2003 server installed behind netscreen 5GT firewall .I have route static public IP to my SBS 2003 for outlook web access and web server it is working fine.Now I want to connect to same SBS 2003 server with windows XP native VPN PPTP connection without using netscreen-remote client but it is not connecting.Please Help me.How can I connect to my SBS server without using netscreen-remote...
0
Comment
Question by:aljabert
  • 2
  • 2
4 Comments
 
LVL 18

Expert Comment

by:Sanga Collins
ID: 24295753
how are you connecting the static ip to your server on the netscreen? are you using a MIP or a VIP
0
 

Author Comment

by:aljabert
ID: 24297990
I am using MIP to connect to my server
0
 
LVL 18

Accepted Solution

by:
Sanga Collins earned 100 total points
ID: 24298069
ok if you are using a MIP, you just need to make sure the ports for the windows server VPN connection are permitted in the MIP policy.

you should test that the connection works first from the LAN, once that is confirmed then its just a matter of opening the correct ports

please post if you have more questions:)
0
 

Author Closing Comment

by:aljabert
ID: 31577548
thank you very much but if you should provide more information on how to open port on netscreen ?
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Join & Write a Comment

Suggested Solutions

Recently, I read that Microsoft has analysed statistics for their security intelligence report. It revealed: still, the clear majority of windows users do their daily work as administrator. An administrative account is a burden, security-wise. My ar…
Let’s list some of the technologies that enable smooth teleworking. 
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

760 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

19 Experts available now in Live!

Get 1:1 Help Now