Solved

HP Color Laserjet 2605 prints only black and white.

Posted on 2009-05-04
1
3,494 Views
Last Modified: 2013-12-15
I have lost driver for HP Color Laserjet 2605. So I decided to download driver from HP web site. After installing driver I found that printer prints only back and white. I took a look to it's sceen and see that all cartriges are almost full. When I went to properties of printer, I found that in front of Color "NO" was written. So now I do not know what to do.
0
Comment
Question by:ferhad
1 Comment
 
LVL 9

Accepted Solution

by:
CyberLex earned 125 total points
ID: 24310329
if you tried the "regular" driver and not the Universal Driver (there are several different packages to download) try installing the driver again, but this time use add printer driver from the printers and faxes folder. When it comes to the driver say have disk and point to C:\Program Files\Hewlett-Packard\LaserJet 2605 Drivers\hppaew02.inf

good luck
Alex
0

Featured Post

IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

How to solve seemingly unsolvable printer issues. Users sometimes run into printing issues where all the normal steps do not seem to work. Well the steps below can show users how to take one extra step beyond the normal steps needed to remove old…
Causes of paper jams:The following are the main causes of paper jams. Guides:If the guides for the paper are not set correctly they may cause the paper to enter at an angle. You should ensure that the guides are set correctly for the paper type a…
Internet Business Fax to Email Made Easy - With eFax Corporate (http://www.enterprise.efax.com), you'll receive a dedicated online fax number, which is used the same way as a typical analog fax number. You'll receive secure faxes in your email, fr…
When you create an app prototype with Adobe XD, you can insert system screens -- sharing or Control Center, for example -- with just a few clicks. This video shows you how. You can take the full course on Experts Exchange at http://bit.ly/XDcourse.

708 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

19 Experts available now in Live!

Get 1:1 Help Now