Solved

How to Configure Polycom Dial Plan for 4, 7 and 10 digit dialing

Posted on 2009-05-05
1
1,993 Views
Last Modified: 2013-12-27
Hi,

How to Configure Polycom Dial Plan for 4, 7 and 10 digit dialing?

Meaning, I don't want to click DIAL after entering the 4, 7 or 10 digits, but there must be a way in which you enter 4 digits and if after a couple of seconds (configurable?) you don't enter more digits, the phone "understands"  that's what you want to dial. Same for 7 or 10 digits.

Thanks
0
Comment
Question by:drotkopf
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 1

Accepted Solution

by:
sryckman earned 500 total points
ID: 24333044
[2-9]xxx will handle four digit dialing of any number starting with a 2-9
[2-9]xxxxxx will handle six digit dialing of any number starting with a 2-9
and
[2-9]xxxxxxxxx  will handle ten digit dialing.

The Polycom's default to three seconds on their digit timeout but it's configurable in the settings at least on the Polycom 501 and 601's we use.
0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

So you think no one can listen in on your VOIP conversations, eh? Well... if you haven't setup Secure Real Time Transport (SRTP), your voice communications can be hacked into by just about anyone! First, let's talk about the intended audience for…
Implementing Avaya's One-X portal is pretty painless, until you want to deploy this to the Android and iPhone clients when these clients are outside of your network. The clients will also work within your local network. Here is our experience and so…
Monitoring a network: why having a policy is the best policy? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the enormous benefits of having a policy-based approach when monitoring medium and large networks. Software utilized in this v…
Add bar graphs to Access queries using Unicode block characters. Graphs appear on every record in the color you want. Give life to numbers. Hopes this gives you ideas on visualizing your data in new ways ~ Create a calculated field in a query: …

734 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question