rcom_infraops
asked on
error - "network drive path was not found" on windows 2003 while i am connecting the netdowk drive
While I am connecting the map drive then the system showing the error "Network Drive path was not found". Even the server is not open own sharing drives. When i check the same from other system then that network path is fine.
One more surprise is my local drives are connected in rdp tool.
Note: 1) None policy implement for this. 2) server service is working fine.3) Server is a member server in AD.
One more surprise is my local drives are connected in rdp tool.
Note: 1) None policy implement for this. 2) server service is working fine.3) Server is a member server in AD.
What happens when you run a net view command from dos prompt?
Are you able to ping your server ? If yes try to remap the network drive.
If not able to even ping the server, check ip,subnet and other network connectivity aspects.
Bm Keshav
If not able to even ping the server, check ip,subnet and other network connectivity aspects.
Bm Keshav
ASKER
Find the net view and nslookup result.
c:\ net view
Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.
C:\Documents and Settings\itinfrawin>net view
Server Name Remark
-------------------------- ---------- ---------- ---------- ---------- ---------- ---
\\GISIMS
\\GMCS01
\\GMCT01
\\GMCT02
\\GMCT03
\\GMCT04
The command completed successfully.
C:\>nslookup
Default Server: gisims.rcomgis.com
Address: 10.8.54.136
> 10.8.55.150
Server: gisims.rcomgis.com
Address: 10.8.54.136
Name: gmct01.rcomgis.com
Address: 10.8.55.150
> gmct01
Server: gisims.rcomgis.com
Address: 10.8.54.136
Name: gmct01.rcomgis.com
Address: 10.8.55.150
>
c:\ net view
Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.
C:\Documents and Settings\itinfrawin>net view
Server Name Remark
--------------------------
\\GISIMS
\\GMCS01
\\GMCT01
\\GMCT02
\\GMCT03
\\GMCT04
The command completed successfully.
C:\>nslookup
Default Server: gisims.rcomgis.com
Address: 10.8.54.136
> 10.8.55.150
Server: gisims.rcomgis.com
Address: 10.8.54.136
Name: gmct01.rcomgis.com
Address: 10.8.55.150
> gmct01
Server: gisims.rcomgis.com
Address: 10.8.54.136
Name: gmct01.rcomgis.com
Address: 10.8.55.150
>
ASKER
Is there any relation to Driver Security Service because I checked all the services are running fine except the Driver Security Service?
ASKER
Please provide your comments urgently.
do you see the share(s) when do you a net view \\xxxxxx when xxxx - servername?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
We resolved the issue from other way/help. But this is my request to you pls reply fastly.