Solved

How to connect to Terminal Server

Posted on 2009-05-06
2
355 Views
Last Modified: 2012-05-06
Hi,
I have a Windows 2008 server running terminal server with licences. I can connect to this via Remote Desktop, but I'm wondering how can users run terminal services. What program do they use? I've looked around for 'terminal services' but can't seem to locate it.

I thought 'remote desktop' was just for admin to access. If client PCs connect via 'remote desktop' then they don't appear to be using terminal server and therefore not using the available licences etc.

I'm a little confused.
Thanks in advance.
0
Comment
Question by:cagrh
2 Comments
 
LVL 13

Accepted Solution

by:
Brum07 earned 500 total points
ID: 24314621
You use the remote desktop software, if it is not using the correct licences you have not setup the TS box correctly.

http://www.windowsecurity.com/articles/Configuring-Windows-Server-2008-Terminal-Services-Gateway-Part1.html

Regards
0
 

Author Closing Comment

by:cagrh
ID: 31578450
Thanks.
0

Featured Post

Forrester Webinar: xMatters Delivers 261% ROI

Guest speaker Dean Davison, Forrester Principal Consultant, explains how a Fortune 500 communication company using xMatters found these results: Achieved a 261% ROI, Experienced $753,280 in net present value benefits over 3 years and Reduced MTTR by 91% for tier 1 incidents.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Redirected folders in a windows domain can be quite useful for a number of reasons, one of them being that with redirected application data, you can give users more seamless experience when logging into different workstations.  For example, if a use…
I was supporting a handful of Windows 2008 (non-R2) 2 node clusters with shared quorum disks. Some had SQL 2008 installed and some were just a vendor application that we supported. For the purposes of this article it doesn’t really matter which so w…
This tutorial will walk an individual through the steps necessary to configure their installation of BackupExec 2012 to use network shared disk space. Verify that the path to the shared storage is valid and that data can be written to that location:…
This tutorial will walk an individual through locating and launching the BEUtility application to properly change the service account username and\or password in situation where it may be necessary or where the password has been inadvertently change…

726 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question