Solved

AS 400 Anynet ports

Posted on 2009-05-07
2
806 Views
Last Modified: 2012-05-06
I need to lockdown a VPN to allow only certain TCP/UDP ports through.  I have all of the ports defined except the ports used by Anynet on an AS400.  I found TCP/UDP 397 but there is some doc stateing that there is also an undefined port used.  Any help with addirional ports would be appreciated.
0
Comment
Question by:bmeyer1908
2 Comments
 
LVL 68

Accepted Solution

by:
woolmilkporc earned 500 total points
ID: 24325364
Hi,
Try 'NETSTAT *CNN' at the AS/400 command line to see active TCP/IP servers.  Press F14 to see port numbers used.
wmp
 
 
0
 
LVL 3

Author Closing Comment

by:bmeyer1908
ID: 31578975
Thanks a bunch.  I'm a Cisco guy and not an AS400 guy.  The client is very happy.
0

Featured Post

Free Tool: IP Lookup

Get more info about an IP address or domain name, such as organization, abuse contacts and geolocation.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Article by: rfc1180
The Maximum Segment size (MSS) is an important consideration when troubleshooting connectivity via the Internet/Intranet. As the packets are routed via the Internet/Intranet, the packets must traverse through multiple routers in the path between two…
Creating an OSPF network that automatically (dynamically) reroutes network traffic over other connections to prevent network downtime.

808 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question