Solved

IBM server goes to screen with floppy disk and asks me to hit f1

Posted on 2009-05-07
1
1,175 Views
Last Modified: 2012-05-06
but if I hit F1 it loops back to the same screen. I just want to format this aray and reload windows. How do I do this
0
Comment
Question by:Lawrencejr
1 Comment
 
LVL 12

Accepted Solution

by:
coredatarecovery earned 500 total points
ID: 24328664
Go into the bios, change the boot order to , cdrom, hard disk.floppy.

boot the OS CD-ROM.
press f6 on the boot when prompted to install new drivers.

Put the floppy disk containing the RAID drivers in the drive, press enter.

finish the install smoothly.
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Project Plan to change subnet mask 6 148
Disk Configuration - Dell R620 6 110
web surfing slughish 4 38
NIC on Proliant 4 32
INTRODUCTION The purpose of this document is to demonstrate the Installation and configuration, of the HP EVA 4400 SAN Storage. The name , IP and the WWN ID’s used here are not the real ones. ABOUT THE STORAGE For most of you reading this, you …
Hyper-convergence systems have taken the IT world by storm and have quickly started to change our point of view of how the data center should and could be architected. In this article, I’ll explain the benefits of employing a hyper-converged system …
Microsoft Active Directory, the widely used IT infrastructure, is known for its high risk of credential theft. The best way to test your Active Directory’s vulnerabilities to pass-the-ticket, pass-the-hash, privilege escalation, and malware attacks …

766 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question