Solved

VOIP over SRW208P not working

Posted on 2009-05-07
5
605 Views
Last Modified: 2012-05-06
I have a Linksys SRW208P switch I bought and I am trying to get my polycom 330 to work over it via POE.

The phone powers on, grabs an ip address from my dhcp. However, the phone does not register with my asterisk box.

Any ideas? I do not have much experience configuring layer 2 or 3 switches.

Also, and this is more of a rant then a question. I can not configure this switch via the web interface. The damn thing needs IE and active X to be turned on. Who in their right mind is running IE with Active X enabled. Who is running IE at all for that matter?
0
Comment
Question by:_SKIN_
  • 5
5 Comments
 

Author Comment

by:_SKIN_
ID: 24329016
BTW... My POE is working correctly. And just to give more info... My subnet mask is 255.255.255.0 on the switch with an ip of 10.0.0.210 and the router is 10.0.0.1

Not sure if that is relevant or not. I am looking at a subnet mask calculator right now trying to figure this whole thing out.
0
 

Author Comment

by:_SKIN_
ID: 24329424
Also, computers behind the switch can see the net just fine.
0
 

Author Comment

by:_SKIN_
ID: 24329672
I dont mean to be a annoyance. I just want to update the question as I am working on this to try to fix it.

The switch seems to be filtering by port. I can get out on port 80 (browse websites) but I can not use vnc on port 5900. I also can not use my sip phone, which is the real problem. Sip works over port 5060 and a couple others.
0
 

Author Comment

by:_SKIN_
ID: 24329848
Okay, so I was wrong. The ports are being passed. For some reason Bonjour does not work though which makes me think it is a subnet mask issue again. I understood subnet masks for a day once. Then I went to bed and woke up not understanding them. I guess I am just going to try every subnet mask till my sip phone works. :P
0
 

Accepted Solution

by:
_SKIN_ earned 0 total points
ID: 24338585
Figured it out... With an out of the box configuration, in order for a sip phone to work you must go to (through the webview) the multicast tab, then bridge multicast forward all, then set all of the ethernet radio buttons to static from the default of none. Leave the lag ones as is.
0

Featured Post

Network it in WD Red

There's an industry-leading WD Red drive for every compatible NAS system to help fulfill your data storage needs. With drives up to 8TB, WD Red offers a wide array of solutions for customers looking to build the biggest, best-performing NAS storage solution.  

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
How to setup a Voice VLAN on a Cisco Meraki MS220-24 3 89
Cisco Router DMZ 5 63
Destination host unreachable 12 69
P2P and MPLS 3 44
When posting a question about a Cisco ASA, Cisco Router or Cisco Switch, it can aid diagnosis if a suitably sanitised copy of the config is provided. It is much better to leave as much of the configuration as original as possible, as it could be tha…
Hi there, This article summarizes what you need if you are going to set up your home or small business Network Attached Storage (NAS) to be accessible from the internet. Of course there are configuration differences based on your NAS or router ma…
Sending a Secure fax is easy with eFax Corporate (http://www.enterprise.efax.com). First, just open a new email message. In the To field, type your recipient's fax number @efaxsend.com. You can even send a secure international fax — just include t…
Both in life and business – not all partnerships are created equal. As the demand for cloud services increases, so do the number of self-proclaimed cloud partners. Asking the right questions up front in the partnership, will enable both parties …

920 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

14 Experts available now in Live!

Get 1:1 Help Now