Solved

How to figure out if you have a 1x6 or other backplane

Posted on 2009-05-07
2
342 Views
Last Modified: 2012-05-06
Currently working on a Dell Poweredge 2600 running 3 36gig drives on a Raid 5 setup. I was given a 300gig drive to install. The drive will be put in as a non Raid drive. Operating system is Pro 2000 Server. I need to figure out what kind of backplane I have before I move further. How do I figure out if I have a 1x6.  
0
Comment
Question by:spookaw
2 Comments
 
LVL 34

Accepted Solution

by:
jamietoner earned 500 total points
ID: 24331958
The 2x3 backplane is the 1x6 with a daughter card installed. Look for the card if it's there it's  2x3 if it's not it's 1x6. Here's info including a pic of where its located.
http://support.dell.com/support/edocs/systems/pe2600/multlang/SCSI_bkpln/0T822A00.pdf
0
 

Author Closing Comment

by:spookaw
ID: 31579260
Thanks so much. I appreciate the explanation. The pdf is great!
0

Featured Post

NAS Cloud Backup Strategies

This article explains backup scenarios when using network storage. We review the so-called “3-2-1 strategy” and summarize the methods you can use to send NAS data to the cloud

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

INTRODUCTION The purpose of this document is to demonstrate the Installation and configuration, of the HP EVA 4400 SAN Storage. The name , IP and the WWN ID’s used here are not the real ones. ABOUT THE STORAGE For most of you reading this, you …
Hyper-convergence systems have taken the IT world by storm and have quickly started to change our point of view of how the data center should and could be architected. In this article, I’ll explain the benefits of employing a hyper-converged system …
Although Jacob Bernoulli (1654-1705) has been credited as the creator of "Binomial Distribution Table", Gottfried Leibniz (1646-1716) did his dissertation on the subject in 1666; Leibniz you may recall is the co-inventor of "Calculus" and beat Isaac…
In an interesting question (https://www.experts-exchange.com/questions/29008360/) here at Experts Exchange, a member asked how to split a single image into multiple images. The primary usage for this is to place many photographs on a flatbed scanner…

860 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question