Terminal server setup for CCIE R&S

Could you please help me my terminal server setup ?

My Terminal server  is cisco 2511 and has 16 ports

ASYNC 1-8   Cable numbering start from 0 to 7 I meant  0-1-2-3-4-5-6-7
ASYNC 9-16 Cable numbering start from 1 to 8 I meant  1-2-3-4-5-6-7-8

I have 6 core routers  1-2-3-4-5-6
I have 3 Backbone      1-2-3
I have 4 Switches       1-2-3-4
I have 1 firewall           1

Could you please tell me how do I assign terminal server octal cable ports to devices.
Wish2BccieAsked:
Who is Participating?
 
that1guy15Commented:
here is a link that goes over the basics
http://ciscotips.wordpress.com/2006/06/26/configuring-a-cisco-router-as-a-terminal-server/

First configure a loopback interface and give it an IP address. then you need to configure host to their connected ports

Router(config)#interface loopback0
Router(config-if)#ip address 192.168.0.1 255.255.255.255

Router(config)#ip host hostname 2001 192.168.0.1 <--the 1 in 2001 represents the octal cable port used
Router(config)#ip host hostname2 2002 192.168.0.1

Also here is the cisco doc with more detail
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a008014f8e7.shtml
0
 
that1guy15Commented:
did this help get you up and running?

0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.