Solved

Two users cannot maintain a continuous RDP session

Posted on 2009-05-08
1
304 Views
Last Modified: 2012-06-21
I have 2 users that have xp vmware guest sessions running on a Vista 64 bit OS.  In their vmware sessions they connect to different remote sites using Cisco vpn 4.8. Once there, they RDP into systems in there perspective networks. The problem is their RDP sessions are continually disconnecting and reconnecting.  This only happens when they RDP, if they close their RDP session everything is fine.  It seems they are sharing something like a token.  I've checked their ip settings and both are different i.e (ip addresses, vm adapter ip's and lan ip's) With one of the two users, I tested with my machine (vpn and rdp). We saw none of the issues.  The only difference is I'm using my os which is xp.  It may have something to do with vmware. I not sure but any lead in the right direction would be great!

Thanks for any help!

0
Comment
Question by:SDRsExpert
1 Comment
 
LVL 1

Accepted Solution

by:
SDRsExpert earned 0 total points
ID: 24354205
-fixed
Used a static address and problems went away.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
I recently attended Cisco Live! in Las Vegas, a conference that boasted over 28,000 techies in attendance, and a week of hands-on learning hosted by a solid partner with which Concerto goes to market.  Every year, Cisco displays cutting-edge technol…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

773 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question