keithmc5
asked on
Remote Web Workplace keeps failing after (between) 48 and 72 hours
I have small nework with SBS 2003 as the DHCP server. The gateway is through a Linksys WAG54GS. I have RWW working fine with Remote clients able to log in. Then after (between) 48 and 72 hours I can't connect anymore. If I then redo using the Internet Connectionwizard. everytihng works fine.
ASKER
Hi Olaf
Thanks for this, Nothing in the event log. I was wondering if it was Linksys. Any ideas what might be happening?
Keith
Thanks for this, Nothing in the event log. I was wondering if it was Linksys. Any ideas what might be happening?
Keith
Have a look at the log in the Linksys.
Post it here and we will have a look.
Firmware update?
Olaf
Post it here and we will have a look.
Firmware update?
Olaf
ASKER
HI Olaf. Not much in Logfile ...it seems to have cleared pre re boot but attached is sample
Sun, 2009-05-10 14:21:04 - UDP Packet - Source:192.168.1.100,37510 Destination:194.72.9.34,53 - [Outgoing]
Sun, 2009-05-10 14:33:20 - TCP Packet - Source:213.64.142.185,2178 9 Destination:213.123.xxx.xx x,445 - [Incoming]
Sun, 2009-05-10 14:21:04 - UDP Packet - Source:192.168.1.100,37510
Sun, 2009-05-10 14:33:20 - TCP Packet - Source:213.64.142.185,2178
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Thanks Olaf. I'll have to wait a few days to see if this works.
If not your linksys will be the guilty party.
Olaf