Solved

Changing MX Record in GoDaddy

Posted on 2009-05-08
1
509 Views
Last Modified: 2013-12-24
Hi,

We use mailstreet for our email service and we have just added their spam defense. They have asked me to point the mx record and gave me two new addresses with priority 10 for each. Do I remove the current exchange address that has priority at zero or does that stay in as another MX record. So I will have three total. Thanks.
0
Comment
Question by:Angelmar
1 Comment
 
LVL 17

Accepted Solution

by:
Suraj earned 500 total points
ID: 24340084
since you want all the Internet mails to filtered for spams before they come in to the exchange servr.. All your MX should be pointed to them... after filtering they will route those mails to you...
all the MX with 10 to them is fine.. u need not have one with 0 to You...

-x-sam-
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
I had an issue with InstallShield not being able to use Computer Browser service on Windows Server 2012. Here is the solution I found.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question