Iomega NAS - Raid 5 - invalid partition table

Posted on 2009-05-12
Last Modified: 2012-05-06
We have a Iomega NAS, with 4 82 gig drives set up on a RAID 5. We booted the NAS today and got a "invalid partition table" error. Does that mean the error is on every drive in the RAID, or one of the hard drives is broke? The OS is a Iomega version of FreeBSD

Thanks in advance...
Question by:PennCharter
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
LVL 16

Expert Comment

ID: 24368225

Is this NAS hacked at all?  Or is it the default OS setup?

- gurutc

Author Comment

ID: 24374325
It is a default OS setup.

Author Comment

ID: 24374399
It is a default OS setup.

Accepted Solution

PennCharter earned 0 total points
ID: 24960937
We put freeNAS on it.
LVL 16

Expert Comment

ID: 24961463
cool with me - gurutc

Featured Post

Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Broadband over Power Lines Broadband over Power Lines is the technology of transmitting computer data through power lines. This method of connectivity allows the user to have access to the internet without having to rely on additional cables, suc…
Hi there, This article summarizes what you need if you are going to set up your home or small business Network Attached Storage (NAS) to be accessible from the internet. Of course there are configuration differences based on your NAS or router ma…
Monitoring a network: why having a policy is the best policy? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the enormous benefits of having a policy-based approach when monitoring medium and large networks. Software utilized in this v…
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…

719 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question