Solved

I have a dns server and I want to create a dns record to allow user to access a web site internally. Can someone help me out?

Posted on 2009-05-12
11
126 Views
Last Modified: 2012-05-06
I have a dns server and I want to create a dns record to allow user to access a web site internally. Can someone help me out?
0
Comment
Question by:henjohn1520
  • 6
  • 5
11 Comments
 
LVL 83

Expert Comment

by:oBdA
ID: 24369168
Yes; and where exactly is your problem?
Open the DNS MMC, expand your forward lookup zone, create a new host (A) entry, for example "www". pointing to the IP address of the server.
0
 

Author Comment

by:henjohn1520
ID: 24369188
I already have host record pointing to a www. What about a second one.
0
 
LVL 83

Expert Comment

by:oBdA
ID: 24369228
A second what? For the obvious reason, you can only have one "www" host entry. You can add multiple IP addresses to that entry, and the DNS server will then use "round robin", alternating the different IP addresses between the incoming queries.
What is it *exactly* you want to achieve?
0
 

Author Comment

by:henjohn1520
ID: 24369244
create a second ip for the www host entry record.
0
 
LVL 83

Expert Comment

by:oBdA
ID: 24369346
Just create a new host entry "www" with the other address.
The next time you do an "nslookup www", the server will answer with both addresses (you might have to do an "ipconfig /flushdns" on the client first).
0
What Should I Do With This Threat Intelligence?

Are you wondering if you actually need threat intelligence? The answer is yes. We explain the basics for creating useful threat intelligence.

 

Author Comment

by:henjohn1520
ID: 24369371
It will not let me create a host entry for www with a different ip.
0
 
LVL 83

Expert Comment

by:oBdA
ID: 24369431
On a W2k3 server? What is the *exact* error message you're getting?
Configuring round robin
http://technet.microsoft.com/en-us/library/cc787484.aspx
0
 

Author Comment

by:henjohn1520
ID: 24369659
I have a cname www record point to a external ip address for our website. I have a server inside of our network that host to of our websites. I need to allow my users to access the two websites. What record do I need to create to allow this.

Thanks,
John
0
 
LVL 83

Accepted Solution

by:
oBdA earned 500 total points
ID: 24369888
A round-robin entry won't help you here. You have two different websites, so you'll need two different host names, so that your users can access the correct site.
Add an entry like "intranet", pointing to your internal web site, and leave the www entry pointing to your external IP.
0
 

Author Comment

by:henjohn1520
ID: 24370726
A cname record, right.
0
 

Author Comment

by:henjohn1520
ID: 24503711
I have corrected the issue by creating a forwared lookup zones for the two domain names DNS.
0

Featured Post

Complete VMware vSphere® ESX(i) & Hyper-V Backup

Capture your entire system, including the host, with patented disk imaging integrated with VMware VADP / Microsoft VSS and RCT. RTOs is as low as 15 seconds with Acronis Active Restore™. You can enjoy unlimited P2V/V2V migrations from any source (even from a different hypervisor)

Join & Write a Comment

by Batuhan Cetin Within the dynamic life of an IT administrator, we hold many information in our minds like user names, passwords, IDs, phone numbers, incomes, service tags, bills and the order from our wives to buy milk when coming back to home.…
I guess it is not common knowledge to most Wintel engineers/administrators: If you have an SNMP-based monitoring system in your environment (and it's common to have SNMP or Syslog) it's reasonably easy to enable monitoring of the Windows Event logs,…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…
When you create an app prototype with Adobe XD, you can insert system screens -- sharing or Control Center, for example -- with just a few clicks. This video shows you how. You can take the full course on Experts Exchange at http://bit.ly/XDcourse.

747 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

15 Experts available now in Live!

Get 1:1 Help Now