Go Premium for a chance to win a PS4. Enter to Win

x
?
Solved

How do you install the Xenserver 2nd CD once the install is finished?

Posted on 2009-05-13
6
Medium Priority
?
4,417 Views
Last Modified: 2013-11-11
Hi,

When I did the Xenserver host install I did not install the second CD.

I now what to install the second CD. How do you do that now the system is up and running?

Peter
P.S  XenServer 5.0 update 3
0
Comment
Question by:PeterSinger
  • 4
6 Comments
 
LVL 6

Expert Comment

by:Kentrix70
ID: 24389751
You should put the physical CD (Xenserver Linux CD) in the cdrom-drive.
Then you should go to the console (or ssh the server with putty, or another ssh client).

Type the commands from the code snippet, and you should be up and running with the Linux Pack.

/Kent
cd /
mount /dev/cdrom /mnt
./install.sh
 
(follow the instructions on the screen to install the Linux pack)
 
umount /mnt

Open in new window

0
 
LVL 6

Accepted Solution

by:
Kentrix70 earned 2000 total points
ID: 24389774
Sorry I forgot something...

Please check this code snippet out instead.

Apologize.

/Kent
cd /
mount /dev/cdrom /mnt
cd mnt
./install.sh
 
(follow the instructions on the screen to install the Linux pack)
 
cd / 
umount /mnt

Open in new window

0
 
LVL 4

Author Comment

by:PeterSinger
ID: 24392784
There was an error message
./install.sh read error on line 30 and it would not run
?
 
0
 
LVL 6

Expert Comment

by:Kentrix70
ID: 24392800
I have done that earlier with success, but
I have not tried exactly with that version, your are mentioning.

What I have experienced a couple of times is bad cd's.

You could try to burn a new one, and then try again.

The Linux Pack Cd is the same version as your server version, isn't it?

It should be.

If it still doesn't work, please tell.

Then we should dig deeper into it.
0
 
LVL 6

Expert Comment

by:Kentrix70
ID: 24393198
0

Featured Post

Microsoft Certification Exam 74-409

Veeam® is happy to provide the Microsoft community with a study guide prepared by MVP and MCT, Orin Thomas. This guide will take you through each of the exam objectives, helping you to prepare for and pass the examination.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

The following article is comprised of the pearls we have garnered deploying virtualization solutions since Virtual Server 2005 and subsequent 2008 RTM+ Hyper-V in standalone and clustered environments.
#Citrix #XenApp #Citrix Scout #Citrix Insight Services #Microsoft VMMAP #Microsoft ADEXPLORE #Microsoft RAMMAP #Microsoft TCPVIEW #Microsoft AUTORUNS #Microsoft PROCESS EXPLORER #Microsoft PROCESS MONITOR
In this video tutorial I show you the main steps to install and configure  a VMware ESXi6.0 server. The video has my comments as text on the screen and you can pause anytime when needed. Hope this will be helpful. Verify that your hardware and BIO…
Video by: ITPro.TV
In this episode Don builds upon the troubleshooting techniques by demonstrating how to properly monitor a vSphere deployment to detect problems before they occur. He begins the show using tools found within the vSphere suite as ends the show demonst…

885 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question