Solved

Publishing FTP Server on ISA Server 2006

Posted on 2009-05-13
7
1,091 Views
Last Modified: 2012-06-21
We are using ISA 2006 and I want to create a new FTP Server Rule such that it inludes port 20 & 21 with a range of ports opened and forwarded to the server for the passive (PASV) port range.

Can someone give step by step instructions to do this

0
Comment
Question by:Steveh24
  • 4
  • 3
7 Comments
 
LVL 2

Accepted Solution

by:
SiHodgy007 earned 125 total points
ID: 24382871
Just create an outbound rule and add the FTP Protocol, then on properties of the rule enable write access.

Then Click Start, click Run, type regedit, and then click OK.
Locate and double-click the following registry subkey:
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/W3Proxy/Parameters

On the Edit menu, point to New, and then click DWORD Value.
Type NonPassiveFTPTransfer as the new value, and then press ENTER
Right-click NonPassiveFTPTransfer, and then click Modify.
In the Value data box, type 0 (zero), and then click OK.

Note To return this setting to the default value, set the NonPassiveFTPTransfer value to 1.

Now you should be able to upload and download using pasv ftp
0
 

Author Comment

by:Steveh24
ID: 24393082
Are Ports 20 & 21 both Outbound
0
 
LVL 2

Expert Comment

by:SiHodgy007
ID: 24393805
Yes
0
PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

 

Author Comment

by:Steveh24
ID: 24393849
The default FTP Server protocol has Port 21 as Inbound, which is the direction the traffic is coming from
0
 
LVL 2

Expert Comment

by:SiHodgy007
ID: 24415096
Just create a new access rule, select the ftp protocol from internal netwrok to external network for all users then finish. Then right click configure FTP remove the read-only tick. Then do the reg steps already mentioned to enable PASV ftp
0
 

Author Comment

by:Steveh24
ID: 24439826
Will this change mean that clients can access the FTP Server with or without PASV enabled.
0
 
LVL 2

Expert Comment

by:SiHodgy007
ID: 24440255
No i don't believe so, I believe most ftp sites have this as standard so don't think you will a problem. Microsoft HP all use this.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Requirements: root access via SSH, telnet, or other.. Alternately, access from the server administrator to run a counter-strike server, and the proper access rights to do so. Enough free disk space (and allowed to use this much, eg disk quota): 6…
Common practice undertaken by most system administrators is to document the configurations and final solutions of anything performed by them for their future use and reference. So here I am going to explain how to export ISA Server 2004 Firewall pol…

828 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question