Solved

Citrix / Xenapp client problem

Posted on 2009-05-14
5
1,305 Views
Last Modified: 2013-11-11
I have two Citrix servers one running Presentation server 4 and the other Citrix metaframe 1.8

The problem has started with the New Citrix / Xenapp client.
How can I get it to allow a simple remote desktop connection as with the previous version. When I try and add a new ICA connection  it will not allow me to enter it into the server name field. With the previous version it was just possible to cut and past it in but not with the latest one. However, even with that I get a message What is the address of the server hosting your published resources even thou the connection works fine.  
I looked thou the documentation and there does not seem to be a clear way to do this.  

JPFN
0
Comment
Question by:JPFN
  • 4
5 Comments
 
LVL 12

Expert Comment

by:Daniel Borger
ID: 24384784

If your using program neighboorhood, I used to get around having to update all my static ICA server connections after each client upgrade by copying my appsrv.ini (C:\Documents and Settings\dborger\Application Data\ICAClient) out before the upgrade and then back in after.
0
 
LVL 12

Accepted Solution

by:
Daniel Borger earned 500 total points
ID: 24384789
oh and the pn.ini
0
 
LVL 12

Expert Comment

by:Daniel Borger
ID: 24385645
Also, there was an option during the client install to Enable Custom ICa Connections. If that was not checked you would not have that option.
See here at the 10:34 time marker http://www.unitek.com/training/citrix/content/view/109/
0
 

Author Comment

by:JPFN
ID: 24386007
Hi dborger
Thank you for the .ini file trick. I found the last Citrix client that had installed correctly and copied over the files. So far it has worked with no problems.

Many Thanks.
-JPFN
0
 
LVL 12

Expert Comment

by:Daniel Borger
ID: 24386658
Sorry for a short answer I've gotta run.. Secure gateway will allow exteranl connections to your apps through the internet. see here: http://support.citrix.com/article/CTX110115
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Is there a tool or cmd that can show the host of a vm? 6 55
sysprep and capture 13 56
Access on thin client? 11 59
VirtualBOX on GNS3 11 93
It Is not possible to enable LLDP in vSwitch(at least is not supported by VMware), so in this article we will enable this, and also go trough how to enabled CDP and how to get this information in vSwitches and also in vDS.
Will try to explain how to use the VMware feature TAGs in the VMs and create Veeam Backup Jobs using TAGs. Since this article is too long, I will create second article for the Veeam tasks.
In this video tutorial I show you the main steps to install and configure  a VMware ESXi6.0 server. The video has my comments as text on the screen and you can pause anytime when needed. Hope this will be helpful. Verify that your hardware and BIO‚Ķ
This demo shows you how to set up the containerized NetScaler CPX with NetScaler Management and Analytics System in a non-routable Mesos/Marathon environment for use with Micro-Services applications.

930 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

8 Experts available now in Live!

Get 1:1 Help Now