Solved

Cisco and Windows 2008 NPS for Radius authentication ?

Posted on 2009-05-14
5
6,637 Views
Last Modified: 2012-05-07
Hello again,
Can someone walk me through for configuring the Windows server 2008 NPS as a Radius server with Cisco Router as its Client. ?

I am following the
http://www.mcmis.co.uk/TechArt/Technical%20Articles.htm
but either i am doing it wrong or i am missing something because its not working and i do not know how will i know if its working or not ?
0
Comment
Question by:WannabeNerd
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
5 Comments
 

Accepted Solution

by:
WannabeNerd earned 0 total points
ID: 24397265
I got it going
Thanks.
0
 

Expert Comment

by:tyty4u2
ID: 24523818
What did you have to end up dong?
0
 

Author Comment

by:WannabeNerd
ID: 24524681
I have followed the above article and it works.
0
 
LVL 4

Expert Comment

by:brownmattc
ID: 25190040
I opened a question with Cisco TAC about this because the document you linked to did not work.

In the network policy there are a couple of changes:
Do not put ANY Vendor Specific Radius Attributies (do not put shell:priv-lvl=15)
Add in the following Standard Radius Attribute:
- Attribute-Type = Service-Type
- Attribute number = 6
- Attribute format = Enumerator
- Attribute Value = Administrative   (look under the Other category)

These changes do the same thing as priv-lvl=15 which basically takes you directly to Enable mode.
0
 

Expert Comment

by:istadmin
ID: 35479349
I can also add that if you are doing this on a SBS 2011 server, the NPS is already installed and configured with several policies.  You need to make sure your NEW VPN policy gets moved to the top of the list.
0

Featured Post

DevOps Toolchain Recommendations

Read this Gartner Research Note and discover how your IT organization can automate and optimize DevOps processes using a toolchain architecture.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
On Feb. 28, Amazon’s Simple Storage Service (S3) went down after an employee issued the wrong command during a debugging exercise. Among those affected were big names like Netflix, Spotify and Expedia.
To efficiently enable the rotation of USB drives for backups, storage pools need to be created. This way no matter which USB drive is installed, the backups will successfully write without any administrative intervention. Multiple USB devices need t…
There are cases when e.g. an IT administrator wants to have full access and view into selected mailboxes on Exchange server, directly from his own email account in Outlook or Outlook Web Access. This proves useful when for example administrator want…

688 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question