?
Solved

IIS Dual Firewall Config

Posted on 2009-05-14
2
Medium Priority
?
405 Views
Last Modified: 2012-05-07
My company is considering implementing a dual firewall DMZ using a Cisco device on the front end and ISA on the back. I haven't found any documentation on this configuration.
Is it workable, and is it a configuration I can get support for?
My biggest concern is having private IP ranges on the "public" face of the ISA.
0
Comment
Question by:timbrigham
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 14

Accepted Solution

by:
Raj-GT earned 2000 total points
ID: 24393192
I have personally deployed Cisco PIXs and ASA in front of ISA in many deployments and it is very workable. This is somewhat a standard configuration as such will be supported by both vendors. Having private IPs in the external interface of the ISA will not be a problem as long as it does not overlap with anything inside your LAN and/or LAT table.
0
 
LVL 1

Author Comment

by:timbrigham
ID: 24394881
Raj-GT:
Thanks. That's just the kind of verification I needed.
0

Featured Post

Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

To setup a SonicWALL for policy based routing to be used with the Websense Content Gateway there are several steps that need to be completed. Below is a rough guide for accomplishing this. One thing of note is this guide is intended to assist in the…
This article offers some helpful and general tips for safe browsing and online shopping. It offers simple and manageable procedures that help to ensure the safety of one's personal information and the security of any devices.
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…
In this video, Percona Solution Engineer Dimitri Vanoverbeke discusses why you want to use at least three nodes in a database cluster. To discuss how Percona Consulting can help with your design and architecture needs for your database and infras…
Suggested Courses
Course of the Month14 days, 20 hours left to enroll

771 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question