Solved

Cisco ASA 5520 IKE Phase 1 VPN Issue

Posted on 2009-05-15
1
824 Views
Last Modified: 2012-05-07
Hi,

I'm trying to build an IPSec Tunnel but unfortunately it looks as though it's failing at phase one. Here is the event logged in the live log:

"5|May 15 2009 10:40:58|713041: IP = xxx.yyy.129.243, IKE Initiator: New Phase 1, Intf inside, IKE Peer xxx.yyy.129.243  local Proxy Address 10.0.xx.yy, remote Proxy Address 192.125.xxx.yyy,  Crypto map (outside_map)"

Any ideas anybody? I'm using a Cisco ASA5520 on my side and our client has a Cisco 3000 concentrator i believe.
5|May 15 2009 10:40:58|713041: IP = xxx.yyy.129.243, IKE Initiator: New Phase 1, Intf inside, IKE Peer xxx.yyy.129.243  local Proxy Address 10.0.xx.yy, remote Proxy Address 192.125.xxx.yyy,  Crypto map (outside_map)

Open in new window

0
Comment
Question by:rigneydolphin
1 Comment
 
LVL 5

Accepted Solution

by:
ksims1129 earned 500 total points
ID: 24394378
CAnt figure out the problem with one line of debug. at least past the crypto config for the ASA5520 and the configuration for the oposite end. Maybe some debugs also. Post wahtever you can and i will be able to help you.
0

Featured Post

IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

For a while, I have wanted to connect my HTC Incredible to my corporate network to take advantage of the phone's powerful capabilities. I searched online and came up with varied answers from "it won't work" to super complicated statements that I did…
This article will cover setting up redundant ISPs for outbound connectivity on an ASA 5510 (although the same should work on the 5520s and up as well).  It’s important to note that this covers outbound connectivity only.  The ASA does not have built…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

706 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

15 Experts available now in Live!

Get 1:1 Help Now